Manual Gossen Metrawatt SECUSTAR FM (page 30 of 160) (English)

590771

Zoom out

Zoom in

1/160

30 GMC-I Messtechnik GmbH

Initial Start-Up – Setup

Manual selection and entry of the IP address at the test system in the

event of communication problems between test system and the PC and in

the case of direct connection to the PC without connection to the com-

pany LAN

Normally you can skip this section and proceed with querying the

automatically selected IP address on page 31.

Ð Check the IP address at your PC:

Enter the “ipconfig” command to the DOS window to this end

(Programs > Accessories > Command Prompt).

The subnet mask indicates which digits of the IP address have to

be transferred without any changes, for example the subnet

decimal number 255 corresponds to hexadecimal FF, or

1111 1111 as a binary number.

Places which are occupied by a 1 must be transferred

unchanged, and places which are occupied by a 0 can be freely

selected.

For the example described above, this means that the IP address

for the test system can be set to 169.254.xxx.xxx.

Normally, a number is selected which only differs from the PC’s IP

address by one or a few final digits, for example 169.254.191.141.

Ð Enter the selected IP address to the uppermost entry field at

the test system.

Ð Enter the sequence of numbers for the PC’s subnet mask to

the net mask field.

Note



The manually selected IP address is overwritten after

restarting.

Network

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Gossen Metrawatt SECUSTAR FM in the language / languages: English as an attachment in your email.

The manual is 1,75 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Gossen Metrawatt SECUSTAR FM Manual

Product: