590771
29
Zoom out
Zoom in
Previous page
1/160
Next page
GMC-I Messtechnik GmbH 29
Initial Start-Up – Setup
Connecting the test system to the LAN
Attention!
!
Consult with the responsible LAN administrator before
connecting the test system to your company LAN.
Note
As an alternative to connecting the system to the respective
company LAN, the test system can be directly connected to
your PC with a crossover cable, or a standard LAN cable
and a hub.
Ð Connect the test system to the LAN.
If the system has been correctly connected to an active LAN by
means of a LAN cable, die grüne LED oberhalb des LAN-Steck-
ers am Prüfsystem. Die gelbe LED blinkt im Takt des Datenflus-
ses.
Assigning an IP Address
Attention!
!
Consult with your LAN administrator before assigning an
IP address.
LAN with DHCP server:
(DHCP: dynamic host control protocol)
Prerequisite: The test system must be connected to the LAN
before it is switched on.
The IP address and the subnet mask are assigned by
the DHCP server, and are entered automatically to the
test system.
Note: There is no assurance that the same IP address will be
assigned each time.
LAN without DHCP server:
A fixed IP address and subnet mask are set up automatically
by the test system:
IP address: 169.254.191.151
Net mask: 255.255.255.0
Note: After rebooting on a LAN with DHCP server, the
previous permanently assigned IP address is overwritten.
Direct connection to the PC via LAN cable and hub,
or via crossover cable:
A fixed IP address and subnet mask are set up automatically
by the test system:
IP address: 169.254.191.151
Net mask: 255.255.255.0
Note: After rebooting on a LAN with DHCP server, the previous
permanently assigned IP address is overwritten.
29


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gossen Metrawatt SECUSTAR FM at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gossen Metrawatt SECUSTAR FM in the language / languages: English as an attachment in your email.

The manual is 1,75 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info