590771

Gossen Metrawatt SECUSTAR FM Manual

11
Zoom out
Zoom in
Previous page
1/160
Next page
GMC-I Messtechnik GmbH 11
Safety Warnings
• Consumers with high inrush current (> 16 A) – function test
(e.g. fluorescent tubes, halogen lamps, headlights etc.) Ob-
serve the following instructions in order to prevent excessive
contact loads.
Attention!
!
The test system is protected with two 16 A FF fuses.
In order to avoid blowing the fuses, we recommend the
use of a Z850 D adapter for testing with sequence I,
making current > 16 A (Z850 B required for connection
to 32 A systems).
The measuring and test system may not be used:
• If it demonstrates visible damage
• With damaged connector cables, measuring cables or patient ports
• If it no longer functions properly
In such cases, the instrument must be removed from operation
and secured against unintentional use.
Opening of Equipment / Repair
The equipment may be opened only by authorized service per-
sonnel to ensure the safe and correct operation of the equipment
and to keep the warranty valid.
Even original spare parts may be installed only by authorized ser-
vice personnel.
In case the equipment was opened by unauthorized personnel,
no warranty regarding personal safety, measurement accuracy,
conformity with applicable safety measures or any consequential
damage is granted by the manufacturer.
Any warranty claims will be forfeited when the warranty seal has
been damaged or removed.
Meanings of Symbols on the Instrument
300 V CAT II
Maximum permissible voltage and measuring category between
connections 1 through 4, the test socket and ground
I System with maximum 16 A nominal current
Warning regarding dangerous electrical voltage
Warning concerning a point of danger
(attention: observe documentation!)
The device may not be disposed of with the trash.
Further information regarding the WEEE mark can be
accessed on the Internet at www.gossenmetrawatt.com by
entering the search term WEEE.
Any warranty claims will be forfeited when the warranty
seal has been damaged or removed.
Data Security
Save your data to the inserted compact flash card or to a PC on a regular
basis in order to prevent any loss of data (see section 4.11.3).
We assume no liability for data loss.
We recommend the following PC program for data processing
and data administration: vFM/PS3 (transmission of measurement
data to a PC, documentation, administration, report generating
and deadline follow-up).
Condensed instructions for PS3 software for maintenance and equipment
management are provided on the CD ROM.
They include important instructions regarding the following topics:
• PS3 demo with additional instructions
• Special features for reading in measured values from a data file
!
… 11 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gossen Metrawatt SECUSTAR FM at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gossen Metrawatt SECUSTAR FM in the language / languages: English as an attachment in your email.

The manual is 1,75 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info