Manual Gossen Metrawatt SECUSTAR FM (page 10 of 160) (English)

590771

Zoom out

Zoom in

1/160

10 GMC-I Messtechnik GmbH

Safety Warnings

2 Safety Features and Precautions

This instrument fulfills the requirements of applicable European

and national EC directives. This is confirmed by means of the CE

mark. A corresponding declaration of conformity can be

requested from GMC-I Messtechnik GmbH.

The test system test system has been manufactured and tested in

accordance with the following safety regulations:

IEC 61010-1 / DIN EN 61010-1 / VDE 0411-1, DIN VDE 0404

IEC 61577 / EN 61577 / VDE 0413-2, -4

When used for its intended purpose, the safety of the user, the

test system and the device under test (electrical equipment or elec-

trical medical device) is assured.

Read the operating instructions carefully and completely before placing

your test system into service. Follow all instructions contained therein.

Make sure that the operating instructions are available to all users of the

instrument.

Tests may only be performed by a qualified electrician, or under

the supervision and direction of a qualified electrician. The user

must be instructed by a qualified electrician in the execution and

evaluation of tests.

Note



Manufacturers and importers of electrical medical

devices must provide documentation for the

performance of maintenance by trained personnel.

Observe the following safety precautions:

• The instrument may only be connected to electrical supply

systems with 230 V/240 V which conform to the valid safety

regulations (e.g. IEC 60364, VDE 0100) and are protected with

a fuse or circuit breaker with a maximum rating of 16 A.

• Measurements within electrical systems are prohibited.

• Be prepared for the occurrence of unexpected voltages at de-

vices under test (for example, capacitors may be dangerously

charged).

• Make certain that the measurement cables are in flawless condi-

tion, e.g. no damage to insulation, no cracks in cables or plugs etc.

• Insulation resistance measurement (equivalent leakage current)

Testing is conducted with up to 500 V. Current limiting is uti-

lized (I < 10 mA), but if the terminals (L and N) are touched,

electrical shock may occur which could result in consequential

accidents.

• Measuring leakage current

It is absolutely essential to assure that the device under test is

operated with line voltage during performance of leakage cur-

rent measurements. Exposed conductive parts may conduct

dangerous contact voltage during testing, and may not under

any circumstances be touched (mains power is disconnected if

leakage current exceeds approx. 10 mA).

• Function test

Attention!

The function test may only be performed after the DUT

has successfully passed the safety test!.For reasons of

safety, the device under test must be switched off before

the function test is started. This precaution prevents in-

advertent start-up of a device under test which may rep-

resent a hazard during operation, e.g. a circular saw or a

disc grinder.

Ending the Function Test: After completion of the function

test, devices under test must be turned off with their own

switch – especially devices with relatively high inductivity.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Gossen Metrawatt SECUSTAR FM in the language / languages: English as an attachment in your email.

The manual is 1,75 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Gossen Metrawatt SECUSTAR FM Manual

Product: