Manual Gossen Metrawatt SECULIFE ST HV (page 40 of 72) (English)

590775

Zoom out

Zoom in

1/72

40 GMC-I Messtechnik GmbH

15.4 Testing Devices in Accordance with DIN VDE 0701, Part 1

You can either change over to testing in accordance with the new

VDE 0701-0702 standard or perform the following measurements in ac-

cordance with the above-mentioned standard:

• Protective conductor measurement R

(permanent connection or with plug)

– Part 1: Test current: ±200 mA DC

– Appendices:

Test current: 10 A AC (Feature G00 or

SECULIFE ST)

Test current

: 25 A AC (Feature G01 or

SECULIFE ST HV)

• High-voltage test as supplement (Appendix E)

(Prerequisite: Feature F02 or SECULIFE ST

HV)

• Insulation resistance measurement R

INS

Part 1

The following safety class I through III appliances and electric equipment

can be tested with this standard, for example:

• Devices with electric motors

• Electric heating devices

• Electric tools

• Light fixtures

• Stereo equipment, television sets

SC I extension cables can also be tested (see chapter 15.7 on page 46).

Appendices (previously part 260)

Appendix E: Electric tools

Check connection parameters and start test.

To Socket This is the default setting. Refer to chapter 7 on page

17 for other types of connection.

Class If the DUT has been connected to the test socket,

safety class recognition is performed (SC I or SC II).

Otherwise, the safety class must be specified manu-

ally.

Ext. Cable

WITH EL1

x: Extension cables or connector cables which are

longer than 5 m can be tested with the help of the

EL1 adapter (optional), either separately or in

combination with a device, see chapter 15.7.

ID No.

See parameters database in chapter 15.2 on page 37.

Setup… See chapter 15.2 on page 37 regarding setup of the

measuring sequence.

Note

Extension cables can only be tested with the VDE 0701-0702

(VDE 0701 part 1) parameter settings, if the EL1 accessory

adapter is used (see chapter 15.7 on page 46).

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Gossen Metrawatt SECULIFE ST HV in the language / languages: English as an attachment in your email.

The manual is 0,91 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Gossen Metrawatt SECULIFE ST HV Manual

Product: