Manual Gossen Metrawatt SECULIFE ST HV (page 30 of 72) (English)

590775

Zoom out

Zoom in

1/72

30 GMC-I Messtechnik GmbH

12 Multimeter Functions

12.1 Probe Voltage U

probe

– Max. 300 V

Voltage is measured between the mains PE terminal at the test instrument

and the probe. In this case the probe can also be used as a phase finder.

For IEC 61010: A selection can be made with the up scroll key as to

whether testing will be conducted under normal conditions, or with

interrupted protective conductor.

For conducting the measurement the DUT must be put into service via

key (14).

Start the U

probe

measurement.

12.2 Alternating / Direct Voltage U

AC/DC

– Max. 253 V

Direct, alternating and pulsating volt-

ages of up to 253 V can be measured

between the 2 and 3 connector jacks.

Furthermore, it is possible to switch be-

tween minimum, maximum and mo-

mentary measured value via key .

This is particularly useful in combination

with the SECULOAD test adapter for weld-

ing equipment (article number Z745V).

Attention!

Two procedures are to be distinguished as from firmware version 7.24:

Procedure 1. DUT not connected to test socket (permanent connection)

õ Select switch position VΩ

and then measurement U

AC/DC

õ Connect the measurement cables to jacks 2 and 3.

õ Scan the measuring point with the test probes.

õ Read the measured values.

õ Remove the test probes from the measuring point and pull off the

measurement cables from jacks 2 and 3.

õ Return to the Multimeter menu with ENTER.

VΩ

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Gossen Metrawatt SECULIFE ST HV in the language / languages: English as an attachment in your email.

The manual is 0,91 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Gossen Metrawatt SECULIFE ST HV Manual

Product: