590783
26
Zoom out
Zoom in
Previous page
1/52
Next page
SECULIFE ESPRO
The following is a breakdown of the parameters available in the LOAD SETUP MODE
and their available options:
Load Setup Configuration
Parameter Description Range
Number Of Loads
Sets the number of load resistors present in the
system. This determines the maximum
combination of resistors available when the Load
Selection is set to Table.
1-12
Load 1
Calibrates the Load 1 Resistance Value. This
should be set to the actual resistance of the
smallest resistor in the system.
0.0-6500.0 ohms
Load 2
Calibrates the Load 2 Resistance Value. This
should be set to the actual resistance of the next
higher resistor in the system.
0.0-6500.0 ohms
Load 3
Calibrates the Load 3 Resistance Value. This
should be set to the actual resistance of the next
higher resistor in the system.
0.0-6500.0 ohms
Load 4
Calibrates the Load 4 Resistance Value. This
should be set to the actual resistance of the next
higher resistor in the system.
0.0-6500.0 ohms
Load 5
Calibrates the Load 5 Resistance Value. This
should be set to the actual resistance of the next
higher resistor in the system.
0.0-6500.0 ohms
Load 6
Calibrates the Load 6 Resistance Value. This
should be set to the actual resistance of the next
higher resistor in the system.
0.0-6500.0 ohms
Load 7
Calibrates the Load 7 Resistance Value. This
should be set to the actual resistance of the next
higher resistor in the system.
0.0-6500.0 ohms
Load 8
Calibrates the Load 8 Resistance Value. This
should be set to the actual resistance of the next
higher resistor in the system.
0.0-6500.0 ohms
Load 9
Calibrates the Load 9 Resistance Value. This
should be set to the actual resistance of the next
higher resistor in the system.
0.0-6500.0 ohms
Load 10
Calibrates the Load 10 Resistance Value. This
should be set to the actual resistance of the next
higher resistor in the system.
0.0-6500.0 ohms
Load 11
Calibrates the Load 11 Resistance Value. This
should be set to the actual resistance of the next
higher resistor in the system.
0.0-6500.0 ohms
Load 12
Calibrates the Load 12 Resistance Value. This
should be set to the actual resistance of the next
higher resistor in the system.
0.0-6500.0 ohms
26 GMC-I Messtechnik GmbH
26


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gossen Metrawatt SECULIFE ES PRO at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gossen Metrawatt SECULIFE ES PRO in the language / languages: English as an attachment in your email.

The manual is 0,89 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info