590779
86
Zoom out
Zoom in
Previous page
1/96
Next page
86 GMC-I Messtechnik GmbH
Characteristic Values PROFITEST MASTER & SECULIFE IP
Reference Conditions
Line voltage 230 V 0.1%
Line frequency 50 Hz 0.1%
Meas. quantity frequency 45 Hz 65 Hz
Measured qty. waveform Sine (deviation between effective
and rectified value 0.1%)
Line impedance angle cos =1
Probe resistance 10
Supply power 12 V 0.5 V
Ambient temperature + 23 C 2 K
Relative humidity 40% 60%
Finger contact For testing potential difference
to ground potential
Standing surface insulation
Purely ohmic
Nominal Ranges of Use
Voltage U
N
120 V (108 ... 132 V)
230 V (196 ... 253 V)
400 V (340 ... 440 V)
Frequency f
N
16
2
/
3
Hz (15.4 ... 18 Hz)
50 Hz (49.5 ... 50.5 Hz)
60 Hz (59.4 ... 60.6 Hz)
200 Hz (190 ... 210 Hz)
400 Hz (380 ... 420 Hz)
Overall voltage range U
Y
65 ... 550 V
Overall frequency range 15.4 ... 420 Hz
Waveform Sine
Temperature range 0 C ... + 40 C
Supply voltage 8 ... 12 V
Line impedance angle Corresponds to cos = 1 ... 0.95
Probe resistance < 50 k
Power Supply
Rechargeable batteries 8 each AA 1.5 V,
we recommend eneloop type AA HR6,
2000 mAh (article no. Z502H)
Number of measurements (standard setup with illumination)
– For R
ISO
1 measurement – 25 s pause:
approx. 1100 measurements
– For R
LO
Automatic polarity reversal / 1 
(1 measuring cycle) – 25 s pause:
approx. 1000 measurements
Battery test Symbolic display of battery voltage
Battery saver circuit Display illumination can be switched off.
The test instrument is switched off
automatically after the last key opera-
tion. The user can select the desired
on-time.
Safety shutdown If supply voltage is too low, the instru-
ment is switched off, or cannot be
switched on.
Recharging socket Installed rechargeable batteries can be
recharged directly by connecting a
charger to the recharging socket: char-
ger for Z502R
Charging time Approx. 2 hours *
* Maximum charging time with fully depleted rechargeable batteries.
A timer in the charger limits charging time to no more than 4 hours.
Overload Capacity
R
ISO
1200 V continuous
U
L-PE
, U
L-N
600 V continuous
RCD, R
E
, R
F
440 V continuous
Z
L-PE
, Z
L-N
550 V (Limits the number of measure-
ments and pause duration. If overload
occurs, the instrument is switched off
by means of a thermostatic switch.)
R
LO
Electronic protection prevents switching
on if interference voltage is present.
Fine-wire fuse protection
FF 3.15 A 10 s,
Fuses blow at > 5 A
Electrical Safety
Protection class II per IEC 61010-1/EN 61010-1/
VDE 0411-1
Nominal voltage 230/400 V (300/500 V)
Test voltage 3.7 kV 50 Hz
Measuring category CAT III 500 V or CAT IV 300 V
Pollution degree 2
Fusing, L and N terminals
1 cartridge fuse-link ea.
FF 3.15/500G 6.3 x 32 mm
Electromagnetic Compatibility (EMC)
Product Standard EN 61326-1:2006
Ambient Conditions
Accuracy 0 to + 40 C
Operation 5 ... + 50 C
Storage 20 ... + 60C (without batteries)
Relative humidity Max. 75%, no condensation allowed
Elevation Max. 2000 m
Mechanical Design
Display Multiple display with dot matrix
128 x 128 pixels
Dimensions W x L x D: 260 x 330 x 90 mm
Weight approx. 2.7 kg with batteries
Protection Housing: IP 40, test probe: IP 40 per
EN 60529/DIN VDE 0470, part 1
Excerpt from Table on the Meaning of IP Codes
Data Interfaces
Type USB slave for PC connection
Type RS 232 for barcode and RFID scanners
Type Bluetooth
®
for connection to a PC
(MTECH+, MXTRA & SECULIFE IP only)
BAT
Interference
emission
Class
EN 55022 A
Interference
immunity
Test Value Feature
EN 61000-4-2 Contact/atmos. –
4 kV/8 kV
EN 61000-4-3 10 V/m
EN 61000-4-4 Mains conn. – 2 kV
EN 61000-4-5 Mains conn. – 1 kV
EN 61000-4-6 Mains conn. – 3 V
EN 61000-4-11 0.5 period / 100%
IP XY
(1
st
digit X)
Protection Against Foreign
Object Entry
IP XY
(2
nd
digit Y)
Protection Against
Penetration by Water
4 1.0 mm dia. 0 Not protected
86


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gossen Metrawatt PROFITEST MTECH plus at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gossen Metrawatt PROFITEST MTECH plus in the language / languages: English as an attachment in your email.

The manual is 2,28 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info