776259
23
Zoom out
Zoom in
Previous page
1/62
Next page
GMC-I Messtechnik GmbH 23
Measuring Method
The following can be measured, depending upon the measuring
method:
•Time to trip t
A: tripping test with nominal residual current IΔN
(the PRCD-K must be tripped at 50% nominal current).
Tripping current I
Δ
for testing with rising residual current I
F
Select the Measuring Function
Connection
Set the Parameter – PRCD with Non-Linear Elements
Start Measurement
7.3.3 SRCD, PRCD-S (SCHUKOMAT, SIDOS or comparable)
RCCBs from the SCHUKOMAT SIDOS series, as well as others
which are of identical electrical design, must be tested after
selecting the corresponding parameter.
Monitoring of the PE conductor is performed for RCDs of this
type. The PE conductor is monitored by the summation current
transformer. If residual current flows from L to PE, tripping current
is cut in half, i.e. the RCCB must be tripped at 50% nominal resid-
ual current IΔN.
Whether or not PRCDs and selective RCDs are of like design can
be tested by means of the touch voltage UIΔN measurement. If a
touch voltage UIΔN of greater than 70 V is measured at the PRCD
of an otherwise error-free system, the PRCD more than likely con-
tains a non-linear element.
PRCD-S
The PRCD-S (portable residual current device – safety) is a spe-
cial, portable protective device with protective conductor detec-
tion or protective conductor monitoring. The device serves to pro-
tect persons from electrical accidents in the low-voltage range
(130 to 1000 V). The PRCD-S must be suitable for commercial
use, and is installed like an extension cable between an electrical
consumer – as a rule an electric tool – and the electric outlet.
Select the Measuring Function
Set Parameter – SRCD / PRCD
Start Measurement
IΔN
Or
IF
Type 1:
IΔN
Or
IF
Type 1:
23


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gossen Metrawatt Profitest Intro at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gossen Metrawatt Profitest Intro in the language / languages: English as an attachment in your email.

The manual is 1.69 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info