590655

Gossen Metrawatt METRISO PRIME plus Manual

18
Zoom out
Zoom in
Previous page
1/68
Next page
18 GMC-I Messtechnik GmbH
3.2.3 Indication of Operating States
Signal Lamps at the High-Voltage Module
The signal lamps integrated into the high-voltage module indicate
two different operating states:
Green: Test instrument ready for use
• Key switch is in the “I” position (ON).
• Power supplies for signal and control circuits at the
high-voltage module are switched on.
• Test voltage supply circuits are still switched off, and are still
secured against inadvertent activation.
Attention!
!
All safety precautions required before entering the dan-
ger zone must now have been implemented, amongst
others: set up WS1 warning signs and ZS2 auxiliary
signs in accordance with DIN 40008, part 3.
Red: Instrument ready for operation, caution: danger!
• The menu for starting the voltage test has been opened, and
the START key has been activated.
• The power supply circuit for the safety test probe is still
switched off, assuming the trigger has not been pulled at the
high-voltage pistol.
• The test probes are secured against inadvertent contact, as-
suming the triggers at the high-voltage pistols have not been
pulled.
Attention!
!
All means of access to the danger zone must be closed
when the high-voltage module is in the “standby” mode!
The device must be sent to GMC-I Service GmbH in order to
replace lamps.
External Signal Lamps (feature F1)
The external signal lamps indicate the same operating states as
the signal lamps integrated into the high-voltage module. They
provide additional security at the test site, and must be plainly vis-
ible beyond the boundaries of the danger zone.
The external signal lamps can only be connected to the 12 V/5 W
output jack at the high-voltage module (feature B1 or B2).
Note
For reasons of safety, only Z504D signal lamps available
from GMC-I Messtechnik GmbH may be used.
Refer to chapter 10.7 on page 62 regarding lamp replacement
… 18 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gossen Metrawatt METRISO PRIME plus at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gossen Metrawatt METRISO PRIME plus in the language / languages: English as an attachment in your email.

The manual is 1,51 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Gossen Metrawatt METRISO PRIME plus

Gossen Metrawatt METRISO PRIME plus User Manual - German - 68 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info