590651

Gossen Metrawatt METRISO 1000A Manual

9
Zoom out
Zoom in
Previous page
1/10
Next page
GMC-I Messtechnik GmbH 9
8.1 Batteries
The condition of the batteries should be checked from time to time. A
dead or deteriorating battery must be removed from the battery compart-
ment. If battery leakage occurs, electrolyte must be completely removed
from the instrument and the batteries must be replaced.
The batteries must also be replaced if the red lamp at the left-hand portion
of the scale area lights up during the battery test described in chapter 3.2
on page 4. Replace batteries as described in chapter 3.1 on page 4.
Always replace batteries as a complete set!
8.2 Replacing the Fuse
The fuse blows if maximum allowable voltage is exceeded when the test
instrument is connected to the measuring circuit.
A replacement fuse is located in the battery compartment.
Attention!
!
Use only specified, original type FF 0.315 A/1000 V fuses!
Bridging the fuse holder or repairing fuses is prohibited!
Instrument components may be damaged if fuses with other
current ratings, other breaking capacities or other blowing
characteristics are used!
The fuse is replaced as follows:
➭ Unscrew the housing base.
➭ Screw the threaded cap out of the fuse holder with the help of a
screwdriver.
➭ Screw the threaded cap back into place along with a new fuse.
➭ Replace the housing base and screw into place.
8.3 Testing for Functionality and Accuracy
Using the tester ISO-Kalibrator 1 (accessories: article number M662A),
you can quickly and rationally test measuring instruments for insulation
resistances and low-ohmic resistances for their functionality and accu-
racy, and thus ensure their proper function.
8.4 Housing
No special maintenance is required for the housing. Keep outside
surfaces clean. Use a slightly dampened cloth for cleaning. Avoid the use
of cleansers, abrasives or solvents.
Opening of Equipment / Repair
The equipment may be opened only by authorized service personnel to
ensure the safe and correct operation of the equipment and to keep the
warranty valid.
Even original spare parts may be installed only by authorized service per-
sonnel.
In case the equipment was opened by unauthorized personnel, no war-
ranty regarding personal safety, measurement accuracy, conformity with
applicable safety measures or any consequential damage is granted by
the manufacturer.
Device Return and Environmentally Compatible Disposal
The instrument is a category 9 product (monitoring and control instru-
ment) in accordance with ElektroG (German Electrical and Electronic
Device Law). This device is subject to the RoHS directive. Furthermore,
we make reference to the fact that the current status in this regard can be
accessed on the Internet at www.gossenmetrawatt.com by entering the
search term WEEE.
We identify our electrical and electronic devices in accordance
with WEEE 2012/19/EU and ElektroG with the symbol shown to
the right per DIN EN 50419 .
These devices may not be disposed with the trash. Please con-
tact our service department regarding the return of old devices (address
see chapter 9 on page 10).
If you use batteries or rechargeable batteries in your instrument or accesso-
ries which no longer function properly, they must be duly disposed of in
compliance with the applicable national regulations.
Batteries or rechargeable batteries may contain harmful substances or
heavy metal such as lead (PB), cadmium (CD) or mercury (Hg).
They symbol shown to the right indicates that batteries or
rechargeable batteries may not be disposed of with the trash, but
must be delivered to collection points specially provided for this
purpose.
Pb Cd Hg
… 9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gossen Metrawatt METRISO 1000A at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gossen Metrawatt METRISO 1000A in the language / languages: English as an attachment in your email.

The manual is 0,26 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info