Manual Gossen Metrawatt METRAOHM 413 (page 30 of 48) (English, German, French)

590656

Zoom out

Zoom in

1/48

Automatic measurement up to 10 Ω

Tests with 200 mA and automatic polarity change

according to EN/IEC 61557-4

Attention!

First switch on the METRAOHM 413 and af-

terwards contact the measuring point with

the test electrode. Button

may not be

pressed thereby, otherwise the METRAOHM

413 can be damaged by external voltages.

1. Measurement setup:

 Connect the insulated 4 mm-connector of the

the measuring line to the socket of the

METRAOHM 413.

 Contact the reference earth with the test

electrode of the measuring line (e.g. by clamp).

2. Zero balancing:

The tester has to be switched o for zero

balancing.

Contact the test electrode of the METRAOHM 413

to the reference earth and ensure safe contact.

Press button

and then the button

at the

same time. The zero balance will be performed.

3. Select automatic measurement:

Hold button

+/-

pressed until POL +/- LEDs light

up quickly and “AuTo“ appears on the display.

4. Automatic measurement:

Shortly press button

to start automatic

measurement. The pole changing is carried out

automatically.

5. Querying of stored measured values + / - :

Press button

+/-

to switch between the

measured resistance value with + polarity and

– polarity.

External voltage warning

Acoustic warning and red LED for interference vol-

tage from 15 V to 400 V (voltage is displayed in V)

Continuity signal

An acoustic signal sounds for 2 seconds during

measurement for resistance values < 2 Ω.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Gossen Metrawatt METRAOHM 413 in the language / languages: English, German, French as an attachment in your email.

The manual is 0,56 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Gossen Metrawatt METRAOHM 413 Manual

Product: