Manual Gossen Metrawatt METRAOHM 413 (page 29 of 48) (English, German, French)

590656

Zoom out

Zoom in

1/48

Quick user guide METRAOHM 413

This is a brief instruction. Observe

the entire operating instruction

of the METRAOHM 413 and

follow all instruction contained

therein.

Standard measurment up to 2 MΩ

Tests with 200 mA according to EN/IEC 61557-4

only at resistance < 10 Ω, polarity change has to be

performed manual

Attention!

First switch on the METRAOHM 413 and

afterwards contact the measuring point

with the test electrode. Button

may not

be pressed thereby, otherwise the

METRAOHM 413 may be damaged by

external voltages.

1. Measurement setup:

 Connect the insulated 4 mm-connector of the

the measuring line to the socket of the

METRAOHM 413.

 Contact the reference earth with the test

electrode of the measuring line (e.g. by clamp).

2. Zero balancing:

The tester has to be switched o for zero

balancing.

Contact the test electrode of the METRAOHM 413

with the reference earth and ensure safe contact.

Press button

and then button

at the

same time. Zero balancing will be performed.

3. Standard measurment:

Press button

shortly to start the

measurement.

4. Change of polarity:

Press button

+/-

, the polarity is indicated by the

green LEDs as well as the “+ Rdy“ or “- Rdy“

indication.

On/O

Selftest

Test Polarity

measuring current

Auto On / O

CAL function

+/-

External voltage POL + / -

200 mA measuring

current

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Gossen Metrawatt METRAOHM 413 in the language / languages: English, German, French as an attachment in your email.

The manual is 0,56 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Gossen Metrawatt METRAOHM 413 Manual

Product: