590624
49
Zoom out
Zoom in
Previous page
1/74
Next page
GMC-I Messtechnik GmbH 49
Device and Measuring Parameters
6.1 Paths to the Various Parameters 6.2 List of All Parameters
bAtt:
0CCvP:
dAtE
/t iME:
caldat/
uer
tEMPintern:
1nFo
SEnd
SET
StorE
StArt
StoP
000.0
CLEAr
StArt/
StoP
hyst
rate
trig
t
.store
Submenus / parameters
time
date
addr
Com ir
irStb
apoff
Clip
beep
tempunit
tempintern
beeper
Main Menus
Query Set
Set
Set
FUNC
ENTER
FUNC
ENTER
FUNC
ENTER
FUNC
ENTER
1nfo
MEASURE
SETUP
020
.
00
V
DC
AC
TRMS
Acknowledge
FUNC
ENTER
Acknowledge
FUNC
ENTER
Acknowledge
FUNC
ENTER
Com bt
bt pin
M248B:
IR
Parameter
Page: Header
Addr
57: Configuring Interface Parameters
APoFF
51: APoFF – Specified Time for Automatic Shutdown and Continuous ON
bAtt 50: bAtt – Query Battery Voltage
bEEP 52: bEEP – Set Limit Value for Continuity Testing
beeper on
/
off
52: bEEPEr on/oFF – Activate/Deactivate Acoustic Signals
bt pin
57: bt Pin – Allocating the pin for the Bluetooth interface (M248B)
caldat 50: cALdAt – Query Calibration Date
CLEAr
24: Measurement Data Recording
CLiP 45: Direct and Pulsating Current Measurement with Current Clamp Sen-
sor, A DC and A (DC+AC)
Com bt 57: Interface Selection for METRA HIT ULTRA BT (M248B)
CoM ir 57: Interface Selection for METRA HIT ULTRA BT (M248B)
dAtE 50: dAtE – Query Date, 51: dAtE – Enter Date
EMpty
24: Measurement Data Recording
hyst
53: HYSt – Hysteresis (parameter for memory mode operation)
1nfo 50: Querying Parameters – InFo Menu
irStb
57: Configuring Interface Parameters
1tEMP 50: ItEMP intErn – Query Reference Temperature
0CCvP
24: Measurement Data Recording
rAtE
53: rAtE – Set Transmission and Storage Rate
SEnd 56: Activating the Interface
SET 51: Entering Parameters – SETUP Menu
StArt
24: Measurement Data Recording
StoP
store
temp intern 50: ItEMP intErn – Query Reference Temperature
temp unit 52: tEMP unit – Select a Unit of Measure for Temperature
t iME 50: tiME – Query Time, 51: tiME – Set Time
trig 54: triG – Trigger Conditions (parameters for memory mode operation)
tstore 54: tStorE – Recording Time (parameter for memory mode operation)
uEr
50: vErSion – Query Firmware Version
49


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gossen Metrawatt METRAHIT ULTRA at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gossen Metrawatt METRAHIT ULTRA in the language / languages: English as an attachment in your email.

The manual is 0,9 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info