Manual Gossen Metrawatt METRAHIT ULTRA BT (page 26 of 74) (English)

590625

Zoom out

Zoom in

1/74

26 GMC-I Messtechnik GmbH

Control Functions

4.5.2 Storage of Individual Values using the SAMPLE or dAtA Sampling

Rate

If only individually selected values need to be saved, SAMPLE must

be selected as the StorE > rAtE sampling value. If memory mode

operation is then started, a single measured value is saved to per-

manent memory with time stamp when the DATA/MIN/MAX key is

pressed and held until two rapidly repeating acoustic signals are

generated.

If dAtA is selected as the StorE > rAtE sampling rate, and if mem-

ory mode operation is then started, measured values ascertained

with activated DATA function are automatically saved to perma-

nent memory with time stamp.

4.5.3 Rapid Momentary Value Acquisition for U DC and I DC

Rapid momentary value acquisition is only activated during mem-

ory mode operation in the U DC and I DC functions, and only after

selecting a sampling periods of 0.5, 1, 2, 5, 10, 20 or 50 ms: All

trigger and hysteresis functions are available, although the mo-

mentary value is acquired with a separate measuring circuit.

This allows for the recording of the waveshapes of low-frequency

signals with reduced resolution and accuracy (typically < 1% of the

measuring range under reference conditions, not specified).

Roughly 300,000 measured values can be saved in this mode.

Values of up to about 1.9 x Umax or Imax are recorded (with fixed

range, range-dependent fluctuations), and thus the range limits

can be exceeded by approximately 90%.

Note



The ZERO/ΔREL function is not taken into consideration for

rapid momentary value acquisition!

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Gossen Metrawatt METRAHIT ULTRA BT in the language / languages: English as an attachment in your email.

The manual is 0,9 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Gossen Metrawatt METRAHIT ULTRA BT Manual

Product: