590626

Gossen Metrawatt METRAHIT 30M Manual

24
Zoom out
Zoom in
Previous page
1/28
Next page
24 GMC-I Messtechnik GmbH
16 Maintenance – Recalibration
Attention!
!
Disconnect the instrument from the measuring
circuit before opening to replace batteries!
16.1 Batteries
Note!
Battery Replacement
Stored measurement values are deleted when the
battery is replaced. We recommend connecting the
power pack, or uploading data to a PC with the help
of METRAwin
10/METRAHit
software, before
replacing batteries in order to prevent data loss.
Operating parameters remain in memory.
Before initial start-up, or after storage of your instrument, make
sure that no leakage has occurred at the instrument battery.
Repeat this inspection at regular intervals.
If battery leakage has occurred, electrolyte from the battery
must be carefully and completely removed with a damp cloth,
and a new battery must be installed.
If the “ ” symbol appears at the LCD, you should replace the
batteries as soon as possible. You can continue to take
measurements, but reduced measuring accuracy may result.
The instrument works with two 1.5 V batteries per IEC R6 or
IEC LR6, or with corresponding, rechargeable NiCd batteries.
Battery Replacement
Ð Lay the instrument onto a flat surface with the front panel
facing down, loosen the two screws at the back and lift out
the housing base starting at point (a).
Ð Remove the batteries from the battery compartment.
Ð Insert two 1.5 V mignon cells into the battery compartment
in the direction indicated by the polarity symbols.
Ð Important for reassembly: First set the housing base onto the
housing top and align accurately (see photo below). Then
press the two housing halves together, first at the bottom
front (a), and then at the top front (b).
Ð Retighten the housing base with the two screws.
Ð Please dispose of depleted batteries properly!
(b) (a)
… 24 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gossen Metrawatt METRAHIT 30M at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gossen Metrawatt METRAHIT 30M in the language / languages: English as an attachment in your email.

The manual is 0,39 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info