590622

Gossen Metrawatt METRAHIT 27EX Manual

19
Zoom out
Zoom in
Previous page
1/36
Next page
GMC-I Messtechnik GMBH 19
GB
8.2.2 Memory Mode Operation – STORE Menu Function
➭ First set the sampling rate for memory mode operation,
and then start memory mode operation.
The sampling rate can also be changed during mem-
ory mode operation.
➭ First select the desired measuring function and an ap-
propriate measuring range.
➭ Check the battery voltage level before starting long-
term measurement recordings, see chapter 10.1 on
page 30.
Starting Memory Mode Operation with Menu Functions
➭ Open the “Operating Mode” menu (refer to the menu
diagram) and select the StorE function.
➭ Now activate the key to open the start menu for
memory mode operation: StArt blinks.
Activate the key once again in order to start memory
mode operation: REM appears at the display.
➭ Press the key in order to switch to the measuring
function.
The “SLEEP MODE” is still active, i.e. the device is
switched on and off automatically at sampling rates of long
duration (see chapter 3).
When memory capacity has been exhausted, MEMO FULL
appears at the display, and an acoustic signal is generated
simultaneously. The signal can be deactivated by pressing
any key.
REM Display
The REM symbol indicates that memory mode operation
has been activated via menu function STORE.
Press the key if you wish to monitor the measured val-
ues also during the memory process.
The „STORE“ function cannot be started while the „DATA“
function is activated.
Exiting Memory Mode Operation with Menu Functions
➭ Select the StorE menu.
➭ Activate the key: StOP blinks.
➭ Activate the key once again: the auxiliary displays
are cleared. Memory mode operation has now been
deactivated.
➭ Press the key in order to return to the measuring
function.
➭ Memory mode operation can also be exited by switch-
ing the instrument off.
8.3 Querying Memory Occupancy – INFO MEMO/OCCUP
Memory occupancy can be queried from the „1NF0 “ menu.
The main display shows current occupancy as a percent-
age between 001 and 100%.
… 19 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gossen Metrawatt METRAHIT 27EX at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gossen Metrawatt METRAHIT 27EX in the language / languages: English as an attachment in your email.

The manual is 0,4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info