590622
17
Zoom out
Zoom in
Previous page
1/36
Next page
GMC-I Messtechnik GMBH 17
GB
8 Using the Menus – from the Initial InFO Menu to
Operating and Measuring Parameters
Menu-driven operation via the initial „1NF0 menu allows
the user to query online help, activate the memory and
query memory occupancy, activate the interface and
configure device parameters.
The initial „1NF0 menu is accessed by simultaneously
pressing and holding the MENU/ESC and ON|OFF keys
with the instrument switched on, until „1NF0 appears
at the display.
The display can be switched from the main „1NF0
menu to the other main menus including “store“,
memo”, send” and “set, and then back to the „1NF0
menu, by repeatedly pressing the  keys.
After accessing the desired main menu, the associated
submenus are opened by activating the key.
The desired parameter or the desired function is se-
lected by repeatedly pressing the  keys.
Acknowledge with the key in order to change the
corresponding parameter or parameters.
After the desired digit has been selected with the 
keys and the value has been adjusted with the 
keys, the next digit is accessed with the key, or the
display is returned to the start menu or switched to the
next submenu.
The measuring mode is started by repeatedly pressing
the MENU/ESC key until the measuring display appears.
The milliohmmeter is switched off by pressing and
holding the ON|OFF key until the display goes blank.
The following pages include an overview of the menu
structure.
8.1 Sampling rAtE
The sampling rate specifies the time interval after which the
respective measured value is transmitted to the interface or
to measured value memory. See page 24 for possible set-
tings. The lower limit of the sampling rate which cannot be
fallen short of, is 0.5 s.
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gossen Metrawatt METRAHIT 27EX at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gossen Metrawatt METRAHIT 27EX in the language / languages: English as an attachment in your email.

The manual is 0,4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info