590622

Gossen Metrawatt METRAHIT 27EX Manual

12
Zoom out
Zoom in
Previous page
1/36
Next page
12 GMC-I Messtechnik GMBH
6 Measured Value Storage
The METRA HIT27EX provides two entirely different
options for storing data:
• Measured Value Memory – DATA Key Function:
Each time the DATA key is pressed and a measuring
point is contacted, a measured value is stored (see
chapter 6.1).
• Memory Mode Operation – STORE Menu Function:
After activating the STORE menu function, all mea-
sured values are saved in accordance with the
selected sampling rate. Memory mode operation is
ended manually using the same menu function, see
chapter 8.2.
In both cases, saved measured values can be read out
with the help of METRAwin
10 PC software (as of version
5.22). However, read-out is only possible if a IR adapter
(BD232 or USB-HIT) has been plugged into the METRA
HIT27EX and connected to the PC with an interface cable
(see Data Interface page 29).
6.1 Measured Value Storage – Key Function “DATA”
Measured values can be automatically “frozen” with the
DATA hold function. This is useful when, for example, con-
tacting the measuring points with the test probes requires
your full attention.
Preparation of Measurement
Memory should be cleared before starting a measurement
series with the DATA key function.
This assures, on the one hand, that adequate memory
capacity is available and, on the other hand, that only data
from the last measurement series are read out in a contigu-
ous fashion. Check current memory occupancy to this
end: INFO MEMO/OCCUP
Clear memory if required: MEMO CLEAr.
Performing Measurements
➭ Press the DATA key.
The message data blinks and indicates readiness for
acquiring the first measured value.
➭ Contact the measuring point as described in chapter
7.3.
After applying the test probes to the measuring point:
– the green LED OK indicates: safe measurement connection.
– The initially acquired value is transferred to the main
display where it remains stored. This is acknowledged
by two successive acoustic signals.
„MAN“ (and, additionally, „ZERO“ in the M measuring
ranges) is displayed simultaneously and indicates that
the measuring range is now fixed.
– the momentary measured values continue to be
shown in the auxiliary display on the left.
➭ Lift the test probes from the measuring point.
The message openl appears on the auxiliary display.
… 12 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gossen Metrawatt METRAHIT 27EX at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gossen Metrawatt METRAHIT 27EX in the language / languages: English as an attachment in your email.

The manual is 0,4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info