590622
6
Zoom out
Zoom in
Previous page
1/36
Next page
6 GMC-I Messtechnik GMBH
Measurements may only be performed within the indi-
cated ambient conditions. See page 29 for operating
temperature range and relative humidity.
The instrument may not be used in a dusty atmo-
sphere.
No maintenance operation may be performed in
potentially explosive atmospheres (cleaning, replace-
ment of batteries, opening the device, etc.)
Observe the following safety precautions:
Type-tested Housing
The milliohmmeter may not be operated with open
housing.
In a potentially explosive atmosphere the housing may
not be opened. In this case, there is no protection
against explosions.
Type-tested Batteries
Use the included or other type-tested batteries with
identical technical features only, see Characteristic Val-
ues.
Before use, please make sure that the housing cover is
closed. There is no protection against explosions when
the housing is open.
Batteries may only be replaced outside the potentially
explosive environment. No spare batteries may be
brought into the potentially explosive environment.
Operation by qualified electricians
The instrument may only be operated by persons who
are capable of recognizing shock hazards and taking
the appropriate safety precautions. Shock hazards
exist anywhere, where voltages of greater than 33 V
(RMS) may occur.
Shock Hazards
Avoid working alone when taking measurements
which involve shock hazards. Be certain that a second
person is present.
Measurement Cables
Make sure that all measurement cables are in faultless
condition, e.g. undamaged insulation, no interruptions
in cables and plugs, etc.
Unexpected Voltages
Be prepared for the occurrence of unexpected volt-
ages at devices under test (e.g. defective devices, after
inspecting the winding resistance of contactor relays,
etc.). For example, capacitors can still be dangerously
charged.
Perform measurements on voltage-free objects only.
Type-tested Fuses (cannot be replaced by the user)
Only use type-tested fuses, as specified in the Charac-
eristic Values. There is no protection against explo-
sions when other fuses are used.
In order to prevent major damage to the instrument
when interference voltage is applied (within the admis-
sible limit values), the mmeasuring circuit is
equipped with a fuse F1 which makes these measur-
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gossen Metrawatt METRAHIT 27EX at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gossen Metrawatt METRAHIT 27EX in the language / languages: English as an attachment in your email.

The manual is 0,4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info