590622
5
Zoom out
Zoom in
Previous page
1/36
Next page
GMC-I Messtechnik GMBH 5
GB
1 Application
METRA HIT27EX is a milliohmmeter with 4-pole measure-
ment, which is designed for deployment in potentially
explosive environment.
In accordance with directive 94/9/CE dated 23th March
1994 the device is approved for being used in explosive,
gaseous atmospheres (IIA T4) with ambient temperatures
between –10 °C and +50 °C.
The device conforms to the following standards:
EN 60079-0:2009 and EN 60079-0:2012
EN 60079-11:2012
It bears CE certification number, type INERIS 05ATEX0040,
which has been conferred by the Ineris certification authority.
2 Safety Features and Precautions
You have selected an instrument which provides you with
high levels of safety.
This instrument fulfills the requirements of the applicable
European and national EC guidelines. We confirm this with
the CE marking. The relevant declaration of conformity can
be obtained from GMC-I Messtechnik GMBH.
The METRA HIT27EX is manufactured and tested in
accordance with safety regulations IEC 61010–1:2010 /
EN 61010–1:2010/VDE 0411–1:2011/EN 60079-0:2009
and
EN 60079-0:2012/EN 60079-11:2012. When used for its
intended purpose, safety of the operator, as well as that of
the instrument, is assured. Their safety is however not
guaranteed, if the instrument is used improperly or handled
carelessly.
In order to maintain flawless technical safety conditions, and to
assure safe use, it is imperative that you read the operating
instructions thoroughly and carefully before placing your instru-
ment into service, and that you follow all instructions contained
therein.
Use for Intended Purpose:
The milliohmmeter described herein is a portable
instrument which can be held in one hand during mea-
surements.
The milliohmmeter may only be operated with the
included or with type-tested batteries, as specified in
the Characteristic Values.
The milliohmmeter may only be operated with closed
housing. The instrument must be removed from the
potentially explosive environment before opening the
housing to replace batteries or fuses.
Only the type-tested fuses specified in the Characteris-
tic Values may be used.
The milliohmmeter may only be used to perform such
measurements as described in chapter 7.
The limits of the overload capacity may not be
exceeded. Refer to the “Characteristic Values” on
page 26 for overload values and overload duration.
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gossen Metrawatt METRAHIT 27EX at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gossen Metrawatt METRAHIT 27EX in the language / languages: English as an attachment in your email.

The manual is 0,4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info