590631
7
Zoom out
Zoom in
Previous page
1/24
Next page
GMC-I Messtechnik GmbH 7
3 Getting started
3.1 Description of the operating controls
There are five connection terminals (1, figure 1), arranged on the front
of the power meter, two for current connection with the markings I* (1)
and I (3) and three for voltage connection with the markings L1 (2), L2
(5) and L3 (8). They are contact-protected.
The operating panel of the power meter consists of:
One selector switch for the voltage ranges (4, figure 1), with the four
ranges 50 V, 100 V, 250 V and 500 V.
One selector switch for the current ranges (5, figure 1), which can be
switched in four ranges 0.25 A, 1 A, 5 A and 25 A. One function switch
(6, figure 1) featuring 12 positions.
3.2 Installing the batteries
Caution: Make an all-pole disconnection of the meter from the
measuring circuits before you open the battery
compartment on the bottom!
Undo the slotted screw of the battery compartment cover using an
adequate tool or a coin, and remove the cover.
Install two 9-V flat cell batteries 6F22, 6LF22 or 6LR61 according
to IEC 86-2 in the two compartments.
Caution: Except for the specified 9-V flat cell batteries, no other voltage
souces must be connected to the battery connection contacts.
The connection contacts must not be connected with each other!
Replace the cover and screw-tighten it.
3.3 Mechanical zero check
Check that the meter is switched off.
Place the meter in a horizontal position.
Check the mechanical zero position of the pointer.
If required, correct the zero position with the adjuster " " on
the front panel.
!
!
0
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gossen Metrawatt MAVOWATT 4 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gossen Metrawatt MAVOWATT 4 in the language / languages: English as an attachment in your email.

The manual is 0,32 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info