590631
8
Zoom out
Zoom in
Previous page
1/24
Next page
8 GMC-I Messtechnik GmbH
3.4 Battery test
To test the battery for the voltage path and the battery for the cur-
rent path, set the function switch to the positions " 1" and "
2", one after another. When, at a time, the pointer is within the bat-
tery section marked " " on the scale, the battery voltages are
within the permissible range.
It is assured that the error limits according to the data given in
chapter 5 „Specifications“ are maintained.
4 Measurement
4.1 Notes on measurements
Prior to connecting the meter, check according to which of the cir-
cuitries shown in the following section the MAVOWATT 4 is to be
connected.
Find out whether direct connection of current path and voltage
path is possible on the basis of the system on which the measure-
ments are to be made and with respect to the power to be mea-
sured.
Caution: In systems having a voltage of more than 600 V,
measurements must, on principle, only be made via
current and voltage transformers!
The nominal currents and nominal voltages of the meters correspond
to those of commercial current transformers with secondary currents
of 1 A and 5 A, and the standardized voltage transformers with sec-
ondary voltages of 100 V or 110 V.
When using current transformers, consider the secondary load.
Particularly with longer connection leads and with a transformer
having a secondary current of 5 A, the power loss on the lines is
often remarkable.
Set up the current path mechanically solid and secure it against
accidental opening. Lay out the cross sections of the leads and the
connection points in such a way that they will not heat-up unper-
missibly. For currents above 5 A, the connections must always be
made as screw connections (e.g. with cable lugs), but not as plug
connections.
!
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gossen Metrawatt MAVOWATT 4 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gossen Metrawatt MAVOWATT 4 in the language / languages: English as an attachment in your email.

The manual is 0,32 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info