512707
15
Zoom out
Zoom in
Previous page
1/26
Next page
Instructions for use and connection
46
meat probe temperature display (d4-6a);
meat probe temperature setting display (end
of oven operation) (d4-6b);
selection sensor value setting 4 (4a, 4b)
5 ON/OFF sensor; signal lamp (red) (5a);
blockage of operation display – activation by
simultaneous pressing of 1 and 2 for
approximately 5 seconds (d6).
General settings
Sound signal volume
When no other function is active it is possible
to set the sound signal volume by touching
the sensor (4b). The display (d4-6) indicates
symbols of 4 volume levels.
Sound signal duration:
oven operation period sound signal (d4-1),
end of oven operation (d4-2) and meat probe
(d4-3) last 7 minutes;
alarm timer sound signal (d4-4) lasts 3
minutes
After the expiry of indicated time the sound
signal goes off automatically.
Each proper touch of sensor is
accompanied by a beep.
Changing the value setting speed
The value setting speed is doubled after 5
seconds of continuous sensor pressing.
Simultaneous pressing of (-) and (+)
sensors (3a/3b) ali (4a/4b)
Resets the settings to “0”, except for the
temperature setting display (d3-1) which is
changed to 30°C, and the end of operation
sensor (d4-2) which changes to indicate the
time of day.
In case the ON/OFF sensor (5) is not pressed
within 5 seconds, all settings are reset
automatically, except for the time of day and the
alarm timer.
In case of eventual power failure which is less
that 1 minute long, all settings remain
unchanged and the oven resumes normal
operation (if activated).
(1)
(1a)
(2a)
(2)
(3a) (4a)
(5a)
(3b) (4b) (5)
(d4-3)
(d3-1)
(4)
(d6)
(d1) (d2)
(d4-6)
(d4-6a) (d4-6b)
(d4-5)
(d4-1)
(d4-4)(d4-2)
(d3-2)
Use of oven
Alternatives with the oven on:
Changing or setting the oven temperature (d3-1)
Changing or setting oven operation time (d4-1)
Changing or setting end of oven operation (d4-2)
Changing or setting meat probe temperature (d4-3)
if the meat probe is connected
Alternatives with the oven off:
By using the food selection sensor (1) or mode
selection sensor (2) you may select the type of
food (1) or function mode (2), and you may
change or set the oven temperature (d3-1),
oven operation time (d4-1), end of oven
operation (d4-2), meat probe (if the type of food
or function mode had been selected before)
(d4-3) alarm timer (d4-4) and the time of day
(d4-5).
changing or setting the alarm timer and the
current daily time (d4-4).
Setting the time of day
After the appliance is connected to the mains
the display (d4-6) flashes »12.00« and the
symbol (d4-5).
By touching the sensors (4a/4b) you may set
the exact daily time (approximately 5 seconds
after the setting is finished the symbol (d4-5)
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gorenje HEC50PP at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gorenje HEC50PP in the language / languages: English as an attachment in your email.

The manual is 1,26 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info