603654
13
Zoom out
Zoom in
Previous page
1/20
Next page
233033
B Timer with the option to turn off the cooking zone
The switch-off timer facilitates the cooking process by allowing you
to set the cooking time for a particular cooking zone. In order to set
the switch-off timer, the power level must already have been set
(see section “Turning on the cooking zones”).
Press the timer sensor key (D) to activate the timer. “00” is
displayed on the timer display (L) and the decimal point (F1)
is lit. When the (D) sensor key is pressed again, the (K) point
indicating the selected cooking zone, starts ashing.
As long as the decimal point is lit, sensor keys “+” (G) and “–” (I)
can be used to set the time in the range from 1 to 99 minutes. IF
the sensor key is pressed and held, the rate at which the timer
setting is changing will be increased after a while.
When the value was set, the countdown starts. The
corresponding point (K) is still ashing, indicating the selected
cooking eld.
Cooking time can be set for each cooking zone
independently. If several timers have been
programmed, the time that is closest to zero will
always be displayed. This is indicated by a ashing
signal light (L) which indicates the cooking eld.
Changing the timer setting
• Timer setting can be changed any time during operation.
Press the timer sensor key (D) to display the remaining time for
the selected cooking eld. The corresponding signal light (K) will
ash.
• Press the “+” (G) or “–” (I) sensor key to set the new cooking time.
Checking the remaining cooking time
If several timers are set, the remaining cooking time can be
displayed by touching the (D) sensor key.
Switching off the timer
After the set time has elapsed, an alarm will sound and the
cooking zone will be turned off. The value “00” ashes on the
timer display. Switch off the alarm by pressing any sensor key; if
this is not done, the alarm will go off after a certain period of time.
To deactivate the timer before the set time has elapsed:
Select the desired timer display (see section Changing the
timer setting) – the set time and the corresponding dot that
indicates the cooking eld will ash.
Press the “–” (I) sensor key to set the value to “00”, or press
the “+” (G) and “–” (I) sensor key simultaneously, to reset the
value to zero immediately.
13
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gorenje ECT610 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gorenje ECT610 in the language / languages: English as an attachment in your email.

The manual is 0,67 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info