336339
11
Zoom out
Zoom in
Previous page
1/19
Next page
134422
When preset time elapses, a beep signals the end, and the
hotplate is switched off. Switch off the alarm by pressing the
sensor of switch-off timer ( C ) or warning sensor ( E ) ,
or it switches off automatically after elapse of certain time.
If you want to switch the timer prior preset time:
Select desired hotplate - preset power setting is ashing.
Touch the timer ON/OFF sensor (C) – indicator displays ’’ti’’,
and the remaining cooking ime is ashing.
Pressing on the far left side of the slider for two minutes
deactivates the timer and the time set; “ti” appears on the
display. The time setting can also be reset by sliding along the
entire slider area by 1 minute decrements.
The illuminated point on the left part of the display is turned off
and the timer is deactivated.
The use and the setting is similar as with the timer; the
difference is that here the alarm on/off sensor (E) is touched.
The alarm can be set even when cooking power level is set to
“00”, independently on all cooking elds.
The shut-off timer and the alarm cannot be used both on the
same cooking eld at the same time. The most recent setting
prevails.
When the alarm is set, the point to the left of the power level
display is not illuminated, while “to” is displayed every few
seconds.
After the time set has expired, the alarm sounds, but the
cooking eld is not turned off.
During the warranty period, any repairs may only be performed by service technicians
authorized by the appliance manufacturer.
Before starting the repair, the appliance must be disconnected from the power mains by removing the
fuse or by removing the mains cord from the wall outlet.
Unauthorized tampering and repairs may cause the risk of electric shock and short circuit; therefore, do
not attempt them yourselves. Leave such tasks to an expert or an authorized service technician.
In case of minor faults or problems with the appliance operation, check the following instructions to see
whether you can eliminate the causes by yourselves.
32
Use of alarm
Special warnings and error reporting
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gorenje ect 2600 p2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gorenje ect 2600 p2 in the language / languages: English as an attachment in your email.

The manual is 0,4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info