336339
10
Zoom out
Zoom in
Previous page
1/19
Next page
134422
Turning timer on
Use of timer facilitates cooking by setting the time of hotplate
operation.
Select the hotplate to be timer controlled - power setting is
ashing. Power setting should be preset to be able to use the
timer at all (see section ‘Switching hotplates on’).
Turn the timer on by touching the timer ON/OFF sensor (C).
Indicator displays a dot in the top left corner, “ti” is ashing.
By touching the slider (D) the desired cooking time is set
from 01 do 99 minutes. At the rst touch, the time is set
according to the part of the slider that you touch. Next to the
slider, the control LEDs light up, according to the time set. By
sliding along the slider, the cooking time setting is changed
in ten minute steps. If you hold the nger on one spot on the
slider for a while, the slider switches to ne tuning, which is
accompanied by a beep. By sliding along the entire slider, the
exact tie can be set. By sliding to the right, the time increases,
while sliding to the left decreases the time setting by one
minute steps.
When you remove the nger, after a few seconds the timer
starts the countdown. Indicator displays actual power setting,
and the dot in front of the numeral indicates that timer is on.
During the cooking procedure, symbol “ti” intermittently
appears on the indicator every few seconds’’.
Operation time can be set for each hotplate
separately.
Changing preset cooking time
Cooking time can be changed anytime during the operation.
Select desired hotplate - preset power setting is ashing.
Touch the timer ON/OFF sensor (C) – indicator displays ’’ti’’,
and the remaining cooking ime is ashing.
By sliding along the entire slider area, the cooking time is
changed by one minute steps.
When you move your nger away from the slider, the cooking
led starts operating with the newly set cooking time.
Checking remaining cooking time
- Select the hotplate and press timer sensor.
- Remaining cooking time appears on the indicator for a few
seconds.
Turning timer off
During the countdown the hotplate power indicator displays “ti”
every few seconds.
31
Timer operation
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gorenje ect 2600 p2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gorenje ect 2600 p2 in the language / languages: English as an attachment in your email.

The manual is 0,4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info