336339
6
Zoom out
Zoom in
Previous page
1/19
Next page
134422
When the hob is off all hotplates are off and indicator LED’s are
off.To switch the hob on, touch the ON/OFF sensor (A) for at
least 1 second. The hob is activated and all power displays (I)
indicate »0« for a period of 10 seconds.
Subsequent setting must be performed within the
next 10 seconds, otherwise the hob is switched off
again.
If you switched the hob on using the ON/OFF sensor (A), within
the next ten seconds you can switch on any hotplate. To select a
particular hotplate, touch the sensor (H). Power indicator of the
selected hotplate (I) will ash for a few seconds.
Set the power level 1-18 by touching the slider. At the rst
touch, the level is set according to the part of the slider
that you touch. Next to the slider, the control LEDs light up,
according to the level set. By sliding along the slider, the
power level setting is changed. By sliding to the right, the
level increasing, while sliding to the left decreases the level.
When you move your nger away from the slider, the cooking
eld starts to operate at the level set. If the rst touch of the
slider is on its far right side (level 18), the automatic cooking is
activated (see Quick heating function).
Changing hotplate power settings
• Select a particular hotplate by touching the sensor (H). Power
indicator of the selected hotplate (I) ashes with the selected
power value.
By touching or sliding along the slide sensor you change
power setting.
When you remove the nger from the slide sensor, the hotplate
starts to operate at selected power.
The hob is tted with electronic sensors which are activated if you touch the marked surface with
your ngertip and keep it for at least one second.
Each touch of the sensors is con rmed by sound signal.
Do not place any objects upon the sensor surface, otherwise you may provoke error mode.
Keep sensor surface clean and free of dirt at all times.
27
Hob controls
Switching the hob on
Switching hotplates on
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gorenje ect 2600 p2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gorenje ect 2600 p2 in the language / languages: English as an attachment in your email.

The manual is 0,4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info