336339
7
Zoom out
Zoom in
Previous page
1/19
Next page
134422
Selected hotplate must be activated.
To select a particular hotplate, touch the sensor (H). Power
indicator is ashing.
By touching the slide sensor (D) at the start, bring the power
setting to “00”. Short beep con rms the OFF position.
The hob is switched off by pressing the main ON/OFF sensor
(A). The sound signal beeps and all indicators go off, except
for those hotplates which are still hot and display the warning
“H” sign as an indication of the remaining heat.
If you switch the hob off prior end of cooking session, use the
remaining heat and save electric energy.
By activating the safety lock system the operation or use of the
cooking elds is prevented. This way, the control unit lock acts as
a child safety lock.
Activating the control unit lock
Safety lock is activated by pressing the sensor (B) for
approximately three seconds; after that, the control LED (B1)
lights up for a few seconds.
Safety lock can be activated when the cooking hob is turned
off, as well when it is operating.
Safety lock prevents the activation of al sensors, except for he
main switch (A) shut-off sensor and the lock sensor (B).
If you wish to activate any of the sensors while the control
unit is locked, the lock signal LED lights up again for a few
seconds and the appliances beeps.
Deactivating the control unit lock
The lock can be disengaged by pressing the sensor (B) for
three seconds; after that, the unlocking is con rmed by a
beep. The signal LED above the sensor is turned off.
When an active hotplate is switched off, or when the entire hob
is switched off, the indicator displays »HI«, as a signal that a
particular »hotplate is still hot«. Display time is calculated in
relation to the used heating power and the period the hotplate
was active prior switching off.
Even when warning signal “HI” disappears, hotplate may still
be hot in certain cases (power failure, leaving any temperature
sensitive objects on the hotplate). Be careful, danger of burns!
28
Switching hotplates off
Switching the hob off
Locking the control unit /
child safety lock
Remaining heat
indicators
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gorenje ect 2600 p2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gorenje ect 2600 p2 in the language / languages: English as an attachment in your email.

The manual is 0,4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info