330857
6
Zoom out
Zoom in
Previous page
1/17
Next page
Instructions for use, installation and connection
43
The oven may be controlled in two ways
1 By selecting the type of food
2 By selecting the function mode
Switching between the two control modes
The oven is off:
If mode (1) is selected, you may switch to mode (2) by
pressing the sensor (2) twice (if oven selector is on
illumination only, one touch of the sensor is enough). All
settings relevant to mode 1 are erased.
Similarly you may switch from mode (2) to mode (1) (in
such cases touch sensor (1) twice).
The oven is on:
Switching is not possible.
If you still wish to change the function mode, first switch
the oven off by touching the ON/OFF sensor (5) (signal
lamp (5a) is flashing) and then select the desired
function mode.
Food selection mode
This mode is appropriate for the preparation of chosen food
with automatic setting of mode, temperature and operation
time.
Touch the food selection sensor and select the type of food
(appropriate symbol and relevant function mode are lit, as
well as the temperature and operation time)
Touch the ON/OFF sensor (5) to start the operation. After
the expiry of the set time the oven is switched off
automatically.
In case of different quantity of food, you may still use this
mode, but you must change the operation time and the
temperature accordingly.
You may however use the end of operation function (see
»End of oven operation« section).
While the signal lamp (5a) is flashing, you may change
settings at random. If the oven is not switched on in
approximately 15 seconds after the last touch of any sensor,
it will switch off automatically.
After the oven is switched on (signal lamp 5a is lit) you
may revoke the setting by consequent touch of the ON/OFF
sensor (5) (signal lamp 5a is flashing) and the oven will
switch off automatically after approximately 5 seconds.
Table of data for selected food (with a sensor 1)
Food type
Pork
chops
whole
Pork
chops
fish
Chicken Pizza Biscuits
and
muffins
Rising of
dough
Raisin
cake
Bread Roast
beef
Defrosting Cleaning
Function mode
Preset
temperature (°C)
195 250 170 200 160 40 160 200 220 - 50
Preset time
(h/min)
1:50 0:25 1:00 0:10 0:25 - 1:00 1:15 1:50 - 0:30
Possibillity of max.
set temperature (°C)
250 250 250 250 250 220 250 250 250 - 220
Weight (in kg)
1 4x0,2 1 1x0,4 3x0,3 - 1,1 1 1 - -
Operation mode selection
This mode is used when you wish to prepare any unspecific
type and quantity of food. You may select the function mode,
oven temperature, operation time, time when you wish the food
to be ready, or roasting with the meat probe and alarm timer.
Once the desired function mode is selected, and other
settings regulated, the oven must be switched on by
pressing the ON/OFF sensor (5) within 15 seconds,
otherwise all settings are rendered void.
The appropriate function mode is selected by pressing the
mode selection sensor (2) (the display indicates the selected
function mode).
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gorenje b 9010 e at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gorenje b 9010 e in the language / languages: English as an attachment in your email.

The manual is 0,98 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info