612697

Gore Research ELM 327 ProScan - Universal OBD-II interface Manual

36
Zoom out
Zoom in
Previous page
1/37
Next page
9. Are you receiving an error stating that the OBD-II interface module could
not be detected?
Yes:
Make sure that you have selected the correct serial port under ProScan’s
Communication Settings dialog.
Make sure that the interface is receiving power as indicated by its LEDs.
Make sure that the cables and interface are securely fastened between the
vehicle and your PC.
If you are using a USB-to-Serial adapter, make sure that you have
installed the drivers according to the manufacturer’s instructions. Also
make sure that the serial port being emulated by the adapter is the one
selected under ProScan’s Communication Settings.
If you are using an ELM327-based interface, make sure that the correct
baud rate setting is selected under ProScan’s Communication Settings.
This is typically 9600 baud, but it could be 38400.
No:
Continue to the next step.
10. Are you receiving an error stating that the OBD-II interface module could
not be initialized?
Yes:
Make sure that your OBD-II interface module is selected under the
Hardware section of ProScan’s Communication Settings dialog.
No:
Continue to the next step.
11. Are you receiving an error stating that the OBD-II interface module was
detected and initialized, but communication with the vehicle could not be
established?
Yes:
Make sure that your OBD-II interface module is selected under the
Hardware section of ProScan’s Communication Settings dialog.
If you are using an ELM327-based interface, and the protocol is set to
“Automatic” under ProScan’s Communication Settings, then you may
need to specify the protocol to use. The automatic protocol detection
usually works, but it is not guaranteed.
If you are using an ELM327-based interface, you can also try bypassing
initialization. To do this, select “Bypass Initialization” under the
ELM327 configuration section of ProScan’s Communication Settings.
No:
Continue to the next step.
36
… 36


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gore Research ELM 327 ProScan - Universal OBD-II interface at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gore Research ELM 327 ProScan - Universal OBD-II interface in the language / languages: English as an attachment in your email.

The manual is 0,54 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info