612697

Gore Research ELM 327 ProScan - Universal OBD-II interface Manual

34
Zoom out
Zoom in
Previous page
1/37
Next page
Troubleshooting
If you can’t establish a working connection with your vehicle, try the following
troubleshooting procedures.
1. Do you have the latest ProScan software installed on your PC?
Yes:
Continue to the next step.
No:
See the “Getting Started” section of this manual.
2. Are you able to launch the ProScan software?
Yes:
Continue to the next step.
No:
Make sure that your PC meets the minimum system requirements
provided in the “Getting Started” section of this manual. If you receive
an error message when trying to launch ProScan, the problem is most
likely due to the .NET Framework not being installed. See the “Getting
Started” section for instructions on installing the .NET Framework.
3. Do you have compatible OBD-II interface hardware attached between your
PC and your vehicle?
Yes:
Continue to the next step.
No:
The ProScan software requires OBD-II interface hardware to translate
OBD-II communications into a format understandable by PC serial ports
and vice versa. ProScan supports any OBD-II interface hardware using
one of the following interpreter chips manufactured by Elm Electronics:
ELM327 (VPW, PWM, ISO, and CAN)
ELM323 (ISO)
ELM322 (VPW)
ELM320 (PWM)
Make sure the OBD-II cable is securely attached from the vehicle’s 16-
pin diagnostic connector into the OBD-II interface module. Make sure
the serial cable is securely attached from the OBD-II interface module
into your PC’s 9-pin serial port. If your PC does not have a serial port,
you will need to attach a USB-to-Serial adapter (sold separately) between
the end of the serial cable and your PC’s USB port.
34
… 34 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gore Research ELM 327 ProScan - Universal OBD-II interface at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gore Research ELM 327 ProScan - Universal OBD-II interface in the language / languages: English as an attachment in your email.

The manual is 0,54 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info