612697

Gore Research ELM 327 ProScan - Universal OBD-II interface Manual

30
Zoom out
Zoom in
Previous page
1/37
Next page
Communication Settings
Toolbar Icon:
Image 20: Communication Settings
The Communication Settings dialog (Image 20) is where you configure the ProScan
software to work with your ELM-based OBD-II interface hardware.
Serial Port
The serial port setting defines which physical serial port on your PC has the OBD-II
interface hardware connected to it. If using a USB-to-Serial adapter, you will need to
specify the serial port being emulated by the USB-to-Serial driver. (See the
documentation accompanying your USB-to-Serial adapter for finding this information.)
Hardware
Select the OBD-II interface hardware being used.
ELM327 Configuration
The ELM327 supports 9600 baud and 38400 baud between the interface and the PC.
Most ELM327 interfaces are internally set to 9600 baud. However, if you have set your
ELM327 hardware to use 38400 baud, you will need to instruct ProScan to use 38400
baud by changing the baud rate setting under ELM327 Configuration.
ELM327 hardware can usually automatically detect the protocol being used by the
vehicle. However, the automatic protocol detection does not always work. Therefore, it is
best practice to specify which protocol should be used.
If you are having problems connecting to an OBD-II vehicle with ELM327 hardware, try
specifying the actual protocol to use and bypass the initialization procedure by selecting
“Bypass Initialization”.
30
… 30 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gore Research ELM 327 ProScan - Universal OBD-II interface at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gore Research ELM 327 ProScan - Universal OBD-II interface in the language / languages: English as an attachment in your email.

The manual is 0,54 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info