612697

Gore Research ELM 327 ProScan - Universal OBD-II interface Manual

9
Zoom out
Zoom in
Previous page
1/37
Next page
which is made conveniently accessible by means of the Manage Profiles button (Blue
Circle, Image 2). Once you have defined a profile for the vehicle, you can make it the
active vehicle profile by selecting it from the drop-down list (Blue Circle, Image 2).
Step-by-step instructions for establishing communication with a vehicle are conveniently
displayed on the left half of the window (Orange Circle, Image 2).
Establishing a Vehicle Connection
Verify that ProScan’s communication settings are correct for the hardware you are
using. See “Communication Settings” for more information.
Make sure you have selected the correct vehicle profile. If one does not already
exist, create a new profile for the vehicle and then select it. See “Vehicle Profile
Manager” for more information.
Physically attach the required cables and interface hardware between the vehicle and
your laptop computer.
Turn the vehicle’s ignition key to the ON position, or go ahead and start the vehicle.
Click the Connect button at the bottom of the window to begin the connection
process (Pink Circle, Image 2).
After you click the Connect button, ProScan will
attempt to detect and initialize the interface hardware
and then establish communication with the vehicle.
Each step of this process can be monitored with the
Connection Status Checklist that is displayed on the
right half of the window (Green Circle, Image 1). A green checkmark (Image 3) will
appear next to tasks once they have been successfully completed. If a task fails, a red X
(Image 4) will appear next to the task.
TIP
If you don’t see the Connect
button, make sure your display
is set to 96 dpi.
Image 3: Task Succeeded Indicator
Image 4: Task Failed Indicator
Once all tasks complete successfully, the red “Disconnected” label will change to a green
“Connected” label, and the ProScan software will have an active connection with the
vehicle. You can then switch to the ProScan tool of your choice and begin your
diagnostic session.
9
… 9 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gore Research ELM 327 ProScan - Universal OBD-II interface at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gore Research ELM 327 ProScan - Universal OBD-II interface in the language / languages: English as an attachment in your email.

The manual is 0,54 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info