693868

Google Nest Hello Videodeurbel Manual

11
Zoom out
Zoom in
Previous page
1/14
Next page
Hook the wire clockwise around the screw and tighten the screw into place.
●Make sure your connections are secure. Lightly pull on the wires to make sure
everything is securely attached.
●Find a place for the chime connector. Make sure the chime connector won’t interfere
with moving parts and muffle the chime. You can use the adhesive backing to stick it
outside the box, or tuck it in if there’s room.
●The final wire (orange in this example) that connects the transformer to the doorbell
remains unchanged.
6. Replace existing doorbell with Nest Hello
With the Nest Chime Connector wired and installed, you are now ready to remove the existing doorbell
and replace it with Nest Hello. Before you begin, double check to make sure the power is still switched
off at the circuit breaker.
a.
Remove the old doorbell. Remove the screws attaching the doorbell to the wall or framing
and remove any additional hardware. Before disconnecting any wires, take a picture of the
existing wiring for reference.
b.
Disconnect the wires. If needed, wrap the wires around a pen or pencil to keep them from
falling into the hole in the wall.
c.
Consider the camera angle. Determine if you need to use the enclosed 15-degree wedge.
The wedge allows you to orient Nest Hello’s field of view to the left or to the right if the
existing doorbell is in a corner or any location that does not provide a good view of the area
directly in front of the door.
d.
Mark screw holes. Using the Nest Hello wall plate as a template, mark any new holes that
need to be drilled. Reuse existing holes when possible.
f.
Screw in the Nest Hello wall plate with the logo upright (and the 15-degree wedge behind it
if you have decided to use it) with the screws provided. For hard surfaces like brick or
stucco, use the included masonry bit to drill holes at your markings. Then use a mallet or
hammer to insert the wall anchors.
g.
Connect the wires to the doorbell screw terminals on the back of Nest Hello. It doesn’t
matter which wire is connected to which terminal. Trim excess wire if wires are too long or
use optional extension wires if they are too short. Using a phillips screwdriver, connect the
wires to the terminals on the back of the Nest Hello device and push any excess wire into
the hole. Upon doing this, you will close the doorbell circuit shown in step 2d above.
10
Downloaded from www.Manualslib.com manuals search engine
… 11 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Google Nest Hello Videodeurbel at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Google Nest Hello Videodeurbel in the language / languages: English as an attachment in your email.

The manual is 0.99 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Google Nest Hello Videodeurbel

Google Nest Hello Videodeurbel User Manual - Dutch - 8 pages

Google Nest Hello Videodeurbel Installation Guide - Dutch - 4 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info