693868

Google Nest Hello Videodeurbel Manual

10
Zoom out
Zoom in
Previous page
1/14
Next page
5. Wire and install the Chime Connector at the Chime Box
With Nest Hello successfully added to the Nest App, you are now ready to wire and install the chime
connector.
Why a Chime Connector? Nest Hello is more than just a doorbell and requires a continuous power
supply from the transformer. With just typical doorbell wiring, the video feed would only be live when
the doorbell is pressed. The chime connector provides that constant supply of power by acting as a
second switch.
a.
Before you begin, switch off power to the doorbell at the circuit breaker.
b.
Next, remove the chime box cover. Chimes come in different shapes and sizes and are
typically located in a hallway or common area near the center of the home. A few examples
are shown below.
c.
Review the existing doorbell circuit. A typical doorbell circuit will have three wires with two
connections at three different locations: at the doorbell, at the chime box, and at a
transformer. Take a picture of the existing chime wiring. This can be a helpful reference
during installation.
The illustration below depicts a typical circuit. Note: the colors of the wires are for
illustration purposes only and not intended to indicate what you will find.
d.
Now, insert the Chime Connector into the circuit (see illustration below).
●Insert the FRONT wire into the plastic clip on the chime connector’s white wire. This
wire is routed from the front doorbell to the chime box (blue in this example). First,
disconnect the FRONT wire from the chime box by loosening the screw and
removing the wire. Pinch the plastic clip to slide in the wire and release it to lock the
wire into place. Trim the wire to ¼” before inserting.
●Connect the chime connector’s white wire to the FRONT terminal at the chime box.
Hook the wire clockwise around the screw and tighten the screw into place.
●Disconnect the TRANS wire. This wire is connects the chime box to the transformer
(purple in this example). Loosen the screw and remove the wire.
●Insert the TRANS wire into the plastic clip on the chime connector’s gray wire.
Pinch the plastic clip to slide in the wire and release it to lock the wire into place.
Trim the wire to ¼” before inserting.
●Connect the chime connector’s gray wire to the TRANS terminal at the chime box.
9
Downloaded from www.Manualslib.com manuals search engine
… 10 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Google Nest Hello Videodeurbel at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Google Nest Hello Videodeurbel in the language / languages: English as an attachment in your email.

The manual is 0.99 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Google Nest Hello Videodeurbel

Google Nest Hello Videodeurbel User Manual - Dutch - 8 pages

Google Nest Hello Videodeurbel Installation Guide - Dutch - 4 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info