656039

Godox TT660 II Manual

4
Zoom out
Zoom in
Previous page
1/5
Next page
11. Protection Function
Over-Temperature Protection
To avoid overheating and degrading the flash head, do not fire
more than 20 continuous flashes at 1/1 full power. After 20
continuous flashes, allow at least 10 minutes for the camera flash
to cool down.
If you fire more than 20 continuous flashes and then fire more
flashes in short intervals, the over-temperature protection function
will be activated to make the recycling time about 10-15 sec. In
such case, give the camera flash about 10 minutes’ break to return
to normal.
When the over-temperature protection is started, the icon is
shown on the LCD display.
Power Output Level
1/1
1/2 +0.7
1/2 +0.3
1/2
1/4(+0.3,+0.7)
1/8(+0.3,+0.7)
1/16(+0.3,+0.7)
1/32(+0.3,+0.7)
1/64(+0.3,+0.7)
1/128(+0.3,+0.7)
Number of Flashes
20
30
40
60
100
200
300
500
1000
Number of flashes that will activate over-temperature protection:
Power
1/1
1/2(+0.3,+0.7)
1/4(+0.3,+0.7)
1/8(+0.3,+0.7)
1/16(+0.3,+0.7)
Times
10
15
20
30
40
Number of flashes that will activate over-temperature protection
in high-speed sync triggering mode:
7. S1 Mode
Press Slave Selection Button to enter S1 mode. In this mode, the
camera flash can function as a slave flash for creating multiple
lighting effects. It is respectively applicable to manual flash
environment. With this function, the flash will fire synchronously
when the main flash fires, the same effect as that by the use of
radio triggers.
8. S2 Mode
Press Slave Selection Button to enter S2 mode. In this mode, the
camera flash can function as a slave flash for creating multiple
lighting effects. It is respectively applicable to TTL flash
environment. With this function, the flash will ignore a single
“preflash” from the main flash and will only fire in response to the
second, actual flash from the main unit.
9. Sync Trigger Function
The Sync Cord Jack is a Φ3.5mm plug. Insert a trigger plug here
and the flash will be fired synchronously with the camera shutter.
Operation Instructions
1. Press C.Fn button to enter
custom setting state.
2. Press “-” or “+”button to
adjust the sleep time.
3. Press C.Fn button to return.
*Press any button to wake it up.
*Please set a short sleep period
if you do not use the flash,
which extends the working
time of the flash.
1. Press C.Fn button to enter
custom setting state.
1. Press “SET” button to enter
“bL” adjustment state.
3. Press the “-” or “+”button to
adjust the settings.
4. Press C.Fn button to return.
Signal
SL
bL
Function
Sleep Time
Setting
Backlight
Setting
Settings & Description
Settable time:
<3>3 min.
<10>10 min.
<30>30 min.
<60>60 min.
<OF> OFF
Press the button to control
backlight setting:
<ON>：Consecutive lighting
<12>：Lighting for 12 sec.
<OF>：Off
10. C.Fn: Setting Custom Functions
6. High-Speed Sync
●
● High Speed Sync (FP flash) enables the flash to synchronize with
all camera shutter speeds. This is convenient when you want to
use aperture priority for fill-flash portraits.
Note:
● The FP flash function can only work properly with the high-
speed remote control (e.g. Godox product CELLS II).
● High-speed sync function cannot be achieved when the flash is
set on the camera’s hotshoe.
Press MODE button makes the flash enter manual mode.
●
high-speed sync flashes, and its recycle time is 10 seconds slower
than the normal time.
Over-temperature protection may be activated after 10 consecutive
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Godox TT660 II at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Godox TT660 II in the language / languages: English as an attachment in your email.

The manual is 1,7 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info