Manual Godox Speedlite Ving V350C Canon (page 8 of 14) (English)

708927

Zoom out

Zoom in

1/14

SET

MODE ZOOM SYNC SLAVE

SET

MODE ZOOM SYNC SLAVE

SET

MODE ZOOM SYNC SLAVE

SET

MODE ZOOM SYNC SLAVE

SET

Set the flash frequency and

3 flash times.

● Press the SET Button to

select the flash frequency.

Turn the Select Dial to set

the number.

● Press the SET Button

again to select the flash

times. Turn the Select Dial

to set the number.

Flash Mode – Multi: Stroboscopic Flash

With stroboscopic flash, a rapid series of flashes is fired. It can be

used to capture a multiple images of a moving subject in a single

photograph.

You can set the firing frequency (number of flashes per sec.

expressed as Hz), the number of flashes, and the flash output.

Press <MODE> button so

1 that <Multi> is displayed.

Turn the Select Dial to choose

2 a desired flash output.

Calculating the Shutter Speed

During stroboscopic flash, the shutter remains open until the firing

stops. Use the formula below to calculate the shutter speed and set

it with the camera.

For example, if the number of flashes is 10 and the firing frequency is

5 Hz, the shutter speed should be at least 2 seconds.

Number of Flashes / Flash Frequency = Shutter Speed

To avoid overheating and deteriorating the flash head, do not

use stroboscopic flash more than 10 times in succession.

After 10 times, allow the camera flash to rest for at least 15

minutes. If you try to use the stroboscopic flash more than 10

times in succession, the firing might stop automatically to

protect the flash head. If this happens, allow at least 15

minutes’ rest for the camera flash.

● Stroboscopic flash is most effective with a highly reflective

subject against a dark background.

● Using a tripod and a remote control is recommended.

● Stroboscopic flash can be used with“buLb”.

● If the number of flashes is displayed as “--”, the firing will

continue until the shutter closes or the battery is

exhausted. The number of flashes will be limited as shown

by the following table.

Maximum Stroboscopic Flashes:

1/4

1/8

1/16

1/32

1/64

1/128

6-7

8-9

60-90

20-50

Flash

output

Wireless Flash Shooting: Radio (2.4G) Transmission

● You can set up three slave groups for TTL autoflash shooting.

With TTL autoflash, you can easily create various lighting effects.

● Any flash settings for the slave units on the master flash in TTL

mode will be automatically sent to the slave units. So the only

thing you need to do is to set the master unit for each slave group

without any operation for the slave units at all during the shooting.

● This flash can work in TTL /M /Multi / OFF flash modes when set

as a master unit.

Master Unit Setting

1. Wireless Settings

You can switch between normal flash and wireless flash. For normal

flash shooting, be sure to set the wireless setting to OFF.

Long Press the <SYNC>

1 button for 2 seconds so that

< > is blinking. Turn the

Select Dial until the < >

is displayed on the LCD

panel, which means the

master unit.

● Even with multiple slave units, the master unit can control

all of them via wireless.

● In this user manual, “master unit” refers to the camera flash

on a camera and “slave unit” will be controlled by the

master unit.

When using Godox 2.4G wireless X system, V350C is perfectly

compatible with other products of our company.

As a master unit, V350C can control the following slave unit

models: AD600, AD600M, AD360II-C, AD360II-N, V860IIC, V850II,

TT685C, TT600.

As a slave unit, V350C can be controlled by the following master

unit models: XProC, X1T-C, V860IIC, V850II, TT685C, TT600.

- 39 -

- 40 -

10-19

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Godox Speedlite Ving V350C Canon in the language / languages: English as an attachment in your email.

The manual is 11,96 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Godox Speedlite Ving V350C Canon Manual

Product: