656049
2
Zoom out
Zoom in
Previous page
1/5
Next page
82.A0QUD001-00 VB
Instruction Manual
中英文双语
Chinese English Bilingual
地址/Add: 深圳市宝安区福永镇福海大道西新和村华发工业园A4
Building A4, Xinhe Huafa Industrial Zone, Fuhai RD West, Fuyong
Town, Baoan District, Shenzhen 518103, China
电话/Tel: +86-755-25701197 / +86-755-25726373
传真/Fax: +86-755-25723423
邮箱/E-mail: godox@godox.com
深圳市神牛摄影器材有限公司
GODOX Photo Equipment Co., Ltd.
FOREWORD
Thanks for choosing Quicker D series studio flashes. It is a durable and high-
performance strobe with complete functions to help professional photographers
create various lighting effects. This product is suited for wedding, advertisement,
portrait, and fashion photography. The perfect light source and A MUST in studios
and photo workshops! Among the benefits you will enjoy:
CONTENTS
01 Foreword
02 For Your Safety
02 Caution
03 Names of Parts
03 Body
03 Accessories
04 Separately Sold Accessories
04 Operations
04 Flash Preparation
04 Power Connection
04 Modeling Lamp
05 Power Output Control
05 Test Button
05 Sync Triggering
05 Slave Trigger Model
05 Buzz Function
05 Memory Function
06 Wireless control Function
06 Tube Replacement
07 Technical Data
07 Maintenance
FOR YOUR SAFETY
To prevent damage to the product or injury to you or to others, read the following
safety precautions in their entirety before using the equipment. Keep these safety
instructions where users can read them for reference.
Do not disassemble or modify
There are high-voltage components inside the unit. Failure to observe this precaution
could result in electric shock or product malfunction. Should the product break open as
the result of a fall or other accident, send the defective back to authorized service
centers for inspection and maintenance.
Keep dry
Do not handle with wet hands or immerse in or expose to water or rain. Failure to
observe this precaution could result in fire or electric shock.
Keep out of reach of children
This device contains small parts that may pose a choking hazard. Consult a physician
immediately if a child swallows any part of this device.
Do not expose to high temperature
Do not leave the device in areas subject to extremely high temperature. Failure to
observe this precaution could result in fire or damage to the housing or internal parts.
CAUTION
After 30 continuous shots at full power, the flash should be cooled down for about 3
minutes. Overheating will occur if it is used continuously without cooling down.
Do not use the modeling lamp for a long time. Otherwise flammable accessories such
as softbox mounted on the flash head will get burnt. The flash can be used
continuously at full power for 10 minutes, and then it should be cooled down for one
minute.
When using a snoot, do not keep the modeling lamp on for a long time or fire over-
frequent flashlight (not over six times in one minute). Overheating will result in
damages for strobe housing and studio light.
Do not touch the lamp cap when the flash or modeling lamp is working, as it will give
out heat, leading to high surface temperature.
Do not touch two terminals of the tube outlet as there is high voltage inside. Wear
insulated gloves when replacing the tube or modeling lamp.
Avoid sudden impacts as this can damage the flash tube and/or modeling lamp.
Do not flash directly towards naked eyes (especially those of babies), otherwise it may
lead to visual impairment.
Disconnect from the power supply when it is not in use.
- 02 -- 01 -
Precise output control on LED display, 30 steps from 5.0-8.0 by 0.1 increment;
High-qualified modeling lamp, 150W output adjustable;
Outstanding output stability, a tolerance of 2% under the same output;
Anti-preflash function, enables synchronization with cameras having a one-preflash firing
system;
Automatic power discharge when the flash output is adjusted from high to low;
Adjusted parameters intelligently remembered after 3s and automatically recovered after
a restart.
Flash output on/off and power level,modeling lamp and buzzer on/off,and flash triggering
can be controlled by using Godox FT series romote control.
15
04
01
07
02
08
19
14
09
10
03
05
06
11
12
16
17
13
18
Body
NAMES OF PARTS
01. AC Power Socket 11. Modeling Lamp Indicator
02. Sync Cord Jack 12. Buzz Indicator
03. Power Switch 13. Slave Triggering Indicator
04. Modeling Lamp Output Controller 14. Test Indicator Lamp
05. Flash Output Controller 15. Light Sensor
06. Modeling Lamp Button 16. Fuse
07. Sound Button 17. Mounting Bracket
08. Slave Model Button 18. Umbrella Input
09. Test Button 19. Direction Adjusting Handle
10. Digital Display 20. Wireless control port
1. Sync Cord
2. Power Cord
3. Standard Reflector
4. Lamp Cover
5. Glass Protection Cover
6. Modeling Lamp
7. Instruction Manual
Accessories
- 03 -
Separately sold accessories
The product can be used in combination with the following accessories sold separately,
so as to achieve best photography effects:
Power Inverter, Softbox, Photographic Umbrella, Light Stand, Barndoor, Snoot, etc.
OPERATIONS
Flash Preparation
Power Connection
Modeling Lamp
1. Take down the lamp
cover. Install the modeling
lamp and put on the glass
protection cover and the
standard reflector.
(To uninstall the standard
reflector, press the blue
release button on the flash
head and turn the standard
reflector counter-clockwise
to take it out, as illustrated in the picture.)
2. Attach the flash unit on an appropriate light stand. Adjust the mounting bracket (17)
for a good angle and make sure it is tightened and fixed. Use the direction adjusting
handle (19) to adjust the flash to a desired direction. Umbrella input (18) is for different
photographic umbrellas to put in.
Use the power cord to connect the flash to an AC power source and turn on the power
switch (3). The lamp on the power switch turns on, indicating it’s connected.
Modeling lamp button (6) controls the modeling lamp status: Modeling lamp indicator
(11) is on, indicating the modeling lamp is on; Modeling lamp indicator (11) is off,
indicating the modeling lamp is turned off. Modeling lamp output controller (4) can be
used to adjust the modeling lamp power output. Modeling lamp will be off automatically
after lighting for 2 hours, in case overheating occurs when user is not nearby to turn it
off.
- 04 -
5
4
3
2
1
6
20
When there is flammable accessory on the flash unit, do not keep the
modeling lamp on for a long time. It is recommended to cool it down for one
minute after 10 minutes' working.
Power Output Control
Test Button
Sync Triggering
Slave Trigger Model
Buzz Function
Memory Function
Flash output controller (5) decides different power output, satisfying light requirements
in different environment. The power is adjustable from 5.0 to 8.0 which will be
accordingly shown on the digital display (10). "OF" on the display indicates that the
flash triggering function is shut down. It can automatically discharge power when the
flash output is adjusted from high to low.
To fire the flash without taking a picture, press the test button (9). It can also help
adjust the flash brightness when using together with the flash output controller (5).
The sync cord jack (2) is a Φ6.35mm
plug. Insert a trigger plug here and the
flash will be fired synchronously with
the camera shutter.
Three slave triggering models are
available and can be set by pressing
Slave Model Button (8).
No optical control: The slave triggering indicator (13) is off, indicating the slave
triggering function is shut down.
One fire model: The slave triggering indicator (13) glows blue, indicating the flash
will fire synchronously on one external flash. In this model, the flash can function as an
auxiliary lamp, offering various effects of light and shadow.
Anti-preflash model: The slave triggering indicator (13) glows red, indicating the
flash will receive two external flashes within 2 seconds and will fire synchronously on
the second flash. In this model, the flash can function as an auxiliary lamp, applicable
to TTL system. With this anti-preflash function, synchronization is supported with
cameras having a one-preflash firing system
The sound button (7) is used to decide whether there is sound reminder for ready flash
after recharging. When the buzz indicator (12) is on, the buzz function is working; if it is
off, the buzz function is shut down. A “BI” sound will be heard when it’s fully charged.
The device is equipped with memory function for the panel setting. It will help
remember the panel setting 3 seconds after you set it. When starting up the flash next
time, the panel setting will be the same as that before powering it off.
Wireless Control Function
Tube Replacement
By using the wireless power-control flash trigger, you can wirelessly control the on-
and-off of your flash, modeling lamp and buzzer, as well as adjust the flash output
level. To start this function, insert the trigger receiver into the Wireless Control Port
(20) and make settings on the trigger. You can also press the camera shutter-release
button to trigger the flash by setting the transmitter hotshoe onto the camera hotshoe.
Shut down the power and remove the power cord before replacing the flash tube and
wear insulated gloves. Then, loosen the iron wire on the tube, keep a balanced hold
on the two feet of the flash tube and pull out the old tube gently. Take down the feet
casing from the old tube and put them on the new tube. Hold two feet of the new tube
and target directly towards the two copper outlets, then push them slightly in. Twine
the iron wire on the stainless steel sheet to fix the flash tube.
- 05 - - 06 -
- 07 -
  感谢您使用闪客Quicker D系列影室闪光灯,此产品持久耐用,功能齐全,性能强大,
全方位支持专业摄影师的各种光效创意,是专业影楼和摄影工作室的理想必备光源,适用
婚纱摄影、广告拍摄、人像以及时尚摄影等。产品有以下亮点:
30级闪光强度随意选择,LED数码显示屏从5.0-8.0准确定位输出功率;
150W大功率造型灯,亮度无级可调;
输出稳定,同一功率连续输出变化不超过2%;
防预闪功能,带一次预闪功能的相机用光控可实现同步拍摄;
自动放电功能,无需预闪放电;
人机工程学面板,3秒后调节参数智能记忆、开机自动恢复;
选购FT-16无线功率遥控器,可无线控制闪光灯功率、造型灯、蜂鸣及触发引闪。
08 前言
09 安全须知
09 注意事项
10 部件
10 机身
10 附件
11 可选购附件
11 使用
11 固定闪光灯
11 接通电源
11 造型灯使用
12 功率调节
12 试闪按钮
12 同步触发
12 光控使用
12 声音提示
12 记忆存储功能
12 无线控制功能
13 装卸闪光灯管
13 产品参数
14 维护保养
- 08 -
Flash diameterΦ14CM, height of flash with handle 23CM,
length of flash with lamp cover 41CM
Approx. 2.7KG
TECHNICAL DATA
Model
Max Power (WS)
Guide Number(m ISO 100)
Color Temperature
Operating Voltage
Power Output Control
Modeling Lamp (W)
Recycle Time
Triggering Method
Flash Duration
Fuse
Dimension
Net Weight
Quicker300D
300WS
58
5600±200K
AC200-240V/50Hz
OFF, 5.0-8.0 (1/32-1/1)
150W
0.3~1.2s
Sync cord, Test button, Slave triggering, Wireless control port
1/2000~1/800s
5A
MAINTENANCE
Shut down the device immediately when it works abnormally and find out the reason.
Avoid sudden impacts and the lamp should be dedusted regularly.
It’s normal for lamp being warm when in use. Avoid continuous flashes when not
necessary.
Maintenance of the flash is up to our authorized maintenance department which can
provide original accessories, expect that users can replace the flash tube and modeling
lamp provided by the manufacturer.
One year warranty period will be cancelled when any unauthorized maintenance is
found.
If the product had failures or was wetted, it can be further used only after repaired by
professionals.
Disconnect the power when doing maintenance work or cleaning.
New changes made to the specifications or designs may not be updated in this manual.
Quicker400D
400WS
65
0.3~1.5s
Quicker600D
600WS
76
8A
Approx. 2.8KG Approx. 3KG
2


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Godox Quicker D at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Godox Quicker D in the language / languages: English as an attachment in your email.

The manual is 2,04 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info