811662

GO Swissdrive Evo control unit Manual

13
Zoom out
Zoom in
Previous page
1/23
Next page
2322
GO SWISSDRIVE
The remaining range is indicated with a three-digit value in kilometres or miles. In
addition, the remaining range is visualised with an analogous circular instrument (1).
The algorithm for the calculation of the remaining range not only considers the total
distance ridden with the pedelec/e-bike (total data), but also the last kilometres. With
an increasing total distance the algorithm therefore adapts more and more to your ri-
ding behaviour and hereby allows forecasts for the remaining range to become more
and more precise.
A Keep in mind that the indicated remaining range is only an approxi-
mate forecast. Due to the route prole, the selected assistance level
and many other factors there may be deviations between the indicated
value and the actual remaining range.
The lower section of the main menu (2) can be congured according to your own wi-
shes by selecting up to two parameters from the current tour data which will be shown
on the display. You can select between the following indications:
- the distance covered,
- the power consumption since the beginning of the tour,
- the mean speed,
- the maximum speed and
- the actual ride time.
The conguration is made in the settings. More information in this regard is given in
the chapter “Conguration and settings”.
7. OVERVIEW TOUR DATA
The second riding menu gives you a compact overview about your current tour (3).
There you will nd information
- on the distance covered (3a),
- on the power consumption since the beginning of the tour (3b),
- on the mean speed (3c),
- on the maximum speed (3d) and
- on the actual ride time (3e).
You can determine the start point of a tour on your own. In this regard the Evo control
unit offers you three different options: When the tour menu is indicated, you can reset
the tour data whenever you want by pressing the Conrm key long and then start a
new tour (4).
Furthermore, you can reset the tour manually in the settings or determine that the
tour data are automatically reset after every stop longer than four hours so that a new
tour is started when you switch on the display again. More information in this regard
is given in the chapter “Conguration and settings”.
I The tour data are only indicated correctly if the circumference of tyre of
your pedelec/e-bike is set correctly. You can adjust the circumference
of tyre in the settings (see chapter “Congurations and settings”).
42 3
a
b
c
d
e
1
… 13 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for GO Swissdrive Evo control unit at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of GO Swissdrive Evo control unit in the language / languages: English as an attachment in your email.

The manual is 1.44 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info