Manual Globo OPTICUM 7100CR (page 15 of 27) (English)

636437

Zoom out

Zoom in

1/27

of signal or LNB your receiver is connected

to. Press BLUE button, it will automatically

detect DiSEqC connecting and set the right

configuration of LNB as well. In less than 1

minute, it will show you the connecting

status, you just need to press OK button to

scan the connected satellites if any.

C. Edit

Press GREEN button to enter next main

part: “Edit Satellite” menu.

D. TP

Press YELLOW button to enter next main

part: “Transponder” menu.

Edit Satellite

The menu displays as the following:

- Satellite setup menu

- Indication picture for the connecting of

antenna and DiSEqC switcher, Motorized

system.

We supply the following functions:

1. Press RED button to scan certain satellite

2. Press GREEN button to enter keyboard

menu to rename certain satellite

3. Press BLUE button to enter “Auto DiSEqC”

menu to check your dish connecting

4. Setup satellite’s parameters as the

following:

- Satellite: Remand certain satellite by using

GREEN button;

- Longitude: The angle of satellite’s

longitude is can not be changed;

- TP: Select the TP of certain satellite. Press

OK button to select one from the list or

press LEFT/RIGHT button to switch one by

one

- LNB: Select the LNB (value & type) on

antenna. Press OK button to select one

from the list or press LEFT/RIGHT button to

switch one by one

Notice: When you select Uni. (9750

/10600), both 9750 and 10600MHz are

supported at the same time, the 22KHz

Tone setting is unnecessary(disabled),

because high or low band is selected by

22KHz automatically

- 22KHz: Press OK or LEFT/RIGHT to turn

22KHz Tone switcher on or off.

Notice: When you use a dual LNB or two

antennas connected to a 22KHz Tone

switch box, make 22KHz Tone switch on or

off to select LNB or antenna.

- 12V: Press OK or LEFT/RIGHT to turn 12V

switcher on or off

- DiSEqC 1.0/1.1: According to the option

and position of DiSEqC switcher, select

OFF(disabled), DiSEqC A to D by OK or

LEFT/RIGHT button, it supports up to 16

antennas connected to the receiver at the

same time.

- Motor: Press OK or LEFT/RIGHT to set

motor on or off; press YELLOW button to

enter “Motor” menu

Motor Menu:

a) Motor Type

Press LEFT/RIGHT button, you can

select DiSEqC1.2 or USALS

(DiSEqC1.3), according to the

motorized DiSEqC system you are

using.

b) Satellite

Select a satellite name that can be used

to identify a motor position by pressing

OK or LEFT/RIGHT button. The

longitude of current satellite will be

shown too.

c) TP

Press OK or LEFT/RIGHT button, you

can select one transponder from current

transponder list to locate the signal.

d) Setup Motor

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Globo OPTICUM 7100CR in the language / languages: English as an attachment in your email.

The manual is 6,48 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Globo OPTICUM 7100CR

Globo OPTICUM 7100CR User Manual - German - 28 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Globo OPTICUM 7100CR Manual

Product: