606985
5
Zoom out
Zoom in
Previous page
1/24
Next page
5
Teaching-in radio connection – LErn menu item
To assign radio motor valve drive(s) or a radio controller to the radio room
temperature sensor, proceed as follows:
1. In normal display press the P button at least 5 seconds in order to
access the program menu.
2. Press the + or - button in order return to
the LErn menu item.
3. Start the programming mode on all
devices to be taught in.
See the operating instructions of the
radio receiver
4. Press the S button on the radio room temperature sensor to start
the teach-in process.
During the teach-in process the LErn display flashes.
After approx. 5 seconds the radio room temperature sensor returns
directly to the normal display.
Deleting radio connection
The radio connection is deleted either
on the radio motor valve drive (see operating instructions of radio
motor valve drive) or
by teaching in the radio connection again.
Start-up (basic setting)
The parameters required for commissioning can be defined in the param-
eter menu.
The factory settings are preset to values which ensure proper operation
even without adaptations in the parameter menu.
In order to change to the parameter menu:
1. Keep the S and P buttons pressed simultaneously for longer
than 5 seconds in the normal display.
The following parameters can be set or read:
i
Teaching in several radio motor valve drives
If a radio room temperature sensor is to be assigned several radio motor
valve drives, first all valve drives must be switched into the teach mode
before that teach-in process is started on the radio room temperature
sensor.
i
Important information on changes in the parameter menu
Changes in this menu should only be carried out by qualified persons
since incorrect settings may result in proper control operation no longer
being possible.
n (normal) Normal display (time, setpoint temperature, actual
temperature)
b (operation) Convection heater, heating circuit distributor or radio
controller operating mode
o (offset) Sensor offset in order to compensate constructional
influences
E (early) Heating optimisation
r (ramp) Gradient of the heating optimisation in minutes per
Kelvin
S (summertime) Specification of the summertime regulation
(Central Europe/GB)
U (clock) Correction value for accuracy in seconds per day
- Software version
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gira 1186 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gira 1186 in the language / languages: English as an attachment in your email.

The manual is 0,44 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Gira 1186

Gira 1186 User Manual - German - 24 pages

Gira 1186 Usermanual and installation guide - Dutch - 24 pages

Gira 1186 User Manual - French - 22 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info