606985
4
Zoom out
Zoom in
Previous page
1/24
Next page
4
Installation
Installation and safety instructions
The radio room temperature sensor is conceived for flush-type mounting.
It consists of two units:
The flush-mounted insert which contains the power electronics, the
radio transmitter and the connections (for flush-mounting box)
The controller top unit with the operating elements which is attached
to the flush-mounted unit.
Before working on the radio room temperature sensor, de-energize the
device and secure it against restarting!
Only connect the radio room temperature sensor to fixed wiring in
closed dry rooms.
Ensure that lines with supply voltage (mains connection) do not come
into contact with low-voltage lines, such as sensor lines (minimum dis-
tance 4 mm at basic-insulated lines).
If the radio room temperature sensor does not function after mount-
ing, first check that the connection is correct as well as the power sup-
ply.
Mounting
The radio room temperature sensor is mounted in flush-mounted boxes.
Please observe the following points for optimal operation:
We recommend an optimum mounting height of 1.50 m.
Do not subject the radio room temperature sensor to direct sun irradi-
ation or use it in the area of draughts or other temperature-influenced
air (such as over electric cookers, refrigerators, etc. or in the area of
direct radiation heat of radiators), since the control behaviour can be
influenced by heat.
Do not use the radio room temperature sensor in a physical unit with
other electrical devices, such as dimmers, since a possible heat devel-
opment could influence the radio room temperature sensor.
Electrical connection
Connect the supply voltage (230 V, 50 Hz) to the terminals L and N.
Improper use
The top unit of the radio room temperature sensor is protected against
unintentional placing on the flush-mounted unit of a Gira blind control
system. When used incorrectly the radio room temperature sensor dis-
plays the text FAIL flashing.
Attention
Installation and mounting of electrical devices may only be carried out by
a qualified electrician.
Attention
Errors during connecting can lead to damage to the controlling device!
No liability is accepted for damage caused by incorrect connection and/
or improper handling!
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gira 1186 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gira 1186 in the language / languages: English as an attachment in your email.

The manual is 0,44 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Gira 1186

Gira 1186 User Manual - German - 24 pages

Gira 1186 Usermanual and installation guide - Dutch - 24 pages

Gira 1186 User Manual - French - 22 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info