606977
19
Zoom out
Zoom in
Previous page
1/24
Next page
6
Start-up (basic setting)
In order to change to the parameter menu:
1. Keep the S and P buttons pressed simultaneously for longer
than 5 seconds in the normal display.
The parameters required for commissioning can be defined in this menu.
The works settings are preset to values which ensure proper operation
even without adaptations in the parameter menu. However, if certain
control parameters have to be adapted, these settings can be carried out
here.
The following parameters can be set or read:
To improve clarity the respective character listed above is displayed in the
top left of the display. The corresponding value is displayed on the right
in the four large numerals.
The respective parameter is opened for modification when the S button
is pressed. The parameter value is displayed flashing.
When a parameter has been modified and confirmed with S, the
parameter menu changes automatically to the next parameter.
The P button can be used at any time to return to the normal time
program.
i
Important information on changes in the parameter menu
Changes in this menu should only be carried out by qualified persons
since incorrect settings may result in proper control operation no longer
being possible.
n (normal) Normal display (time, setpoint temperature,
actual temperature)
b (operation) Operating mode: internal sensor, external
sensor or internal sensor with limit
d (diff) Differential gap = Hysteresis
G (limit) Limiting temperature
F (sensor) Temperature at the external sensor
t (time) Minimum ON period in seconds [s]
o (offset) Sensor offset in order to compensate
constructional influences
E (early) Heating optimisation
r (ramp) Gradient of the heating optimisation in
minutes per Kelvin [min/K]
S (Summertime) Specification which summertime regulation
(Central European or GB) is to be used for
calculation
U (clock) Correction value for accuracy in seconds per
day [s/d]
-Software version
i
Modifications in the parameter menu
Modifications to the parameters are implemented immediately! The
parameter is regarded as modified, irrespective of whether the menu is
exited with S or P or whether the system returns automatically to
the normal display after 1 Minute.
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gira 0389 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gira 0389 in the language / languages: English as an attachment in your email.

The manual is 0,46 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Gira 0389

Gira 0389 User Manual - German - 24 pages

Gira 0389 User Manual - Dutch - 24 pages

Gira 0389 User Manual - French - 24 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info