606977
17
Zoom out
Zoom in
Previous page
1/24
Next page
4
Installation
Installation and safety instructions
The room temperature controller is conceived for flush-type mounting. It
is divided into two units:
The underplaster unit which contains the power electronics and the
connections (for flush-mounting box)
The controller top unit with the operating elements which is attached
to the underplaster unit.
Before working on the room temperature controller de-energize the
device and secure against restarting!
Only connect the room temperature controller to fixed wiring in closed
dry rooms.
Ensure that lines with supply voltage, such as the power supply and
relay connecting leads do not come into contact with low-voltage lines
such as sensor lines (minimum distance 4 mm at basic-insulated
lines).
If the room temperature controller does not function after mounting,
first check that the connection is correct as well as the power supply.
Lay the base sensor of the room temperature controller in a sensor
conduit. If an open sensor conduit is to be used, close it with a plug so
that tile bonding agent or cast plaster cannot ingress into the sensor
conduit, causing the sensor to be damaged.
Mounting
The room temperature controller can be inserted or mounted into flush-
mounting boxes.
Please observe the following points for optimal operation:
We recommend an optimum mounting height of 1.50 m.
Do not subject the room temperature controller to direct sun
irradiation or use it in the area of draughts or other temperature-
influenced air (such as over electric cookers, refrigerators, etc. or in the
area of direct radiation heat of radiators), since the control behaviour
can be influenced by heat.
Do not use the room temperature controller in a physical unit with
other electrical devices, such as dimmers, since a possible heat
development could influence the room temperature controller.
When used with an external temperature sensor an empty conduit
(flexible or firm plastic tube) has to be laid, for example in the flooring,
until the measuring point. Select an installation location for the
external sensor at which the room temperature can be measured
neutrally as far as possible.
Attention
Installation and mounting may only be carried out by a qualified
electrician.
Attention
Errors during connecting can lead to damage to the controlling device!
No liability is accepted for damage caused by incorrect connection and/
or improper handling!
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gira 0389 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gira 0389 in the language / languages: English as an attachment in your email.

The manual is 0,46 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Gira 0389

Gira 0389 User Manual - German - 24 pages

Gira 0389 User Manual - Dutch - 24 pages

Gira 0389 User Manual - French - 24 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info