795395
51
Zoom out
Zoom in
Previous page
1/142
Next page
Gigaset N870 IP PRO / Admin IE-UK-International en / A31008-XXXXX-XXXX-X-XX / settings_basestations.fm / 8/10/21
Template Module, Version 2.1, 11.08.2020 / Template Basiseinstellungen: Version 3.1 - 07.07.2020
Base stations
51
DECT-based synchronisation
To relay DECT synchronisation signals from base station A to base station B, base station B must
be able to receive signals from base station A with sufficient signal quality.
A base station can synchronise with each base station on a higher sync level. The sync level
concept allows base stations to automatically select the best suitable base station (having a
lower sync level number) to receive synchronisation signal from. Simultaneously, it guarantees
a strictly limited number of hops along any branch in the synchronisation tree and to prevent
circles between automatically optimised synchronisation chains.
During configuration, assign one level in the synchronisation hierarchy (sync level) to each base
station. Sync level 1 is the highest level; this is the level of the sync master and appears only once
in each cluster. A base station always synchronises itself with a base station that has a better sync
level. If it sees several base stations with a better sync level, it synchronises itself with the base
station that provides the best signal quality. If it does not see any base station with a higher sync
level, it cannot synchronise.
LAN-based synchronisation along the synchronisation path
If the DECT connection between base stations seems to be not reliable enough to permanently
guarantee a stable DECT over the air synchronization, e.g., because they are separated by iron
doors or a firewall, you can determine that synchronisation should take place via LAN. In this
case the base station with the higher sync level will act as LAN master, the base station with the
lower sync level is a LAN slave. One base station must be explicitly be defined as LAN master. This
should not be the device on which the DECT Manager is also located.
Advantages of LAN synchronisation compared with DECT synchronisation:
Higher flexibility in the arrangement of the base stations as no synchronisation chains need
to be formed.
Fewer base stations required as the overlapping area of the base stations is smaller. The over-
lapping area for handset handover can be smaller, because neighboured base stations do
not need to receive each other in stable error free quality, but they must still be able to detect
each other for the process of dynamic channel selection.
Configuration of the system is simplified as all base stations can be synchronised on one
synchronisation master.
Network requirements
The N870 IP PRO devices must be connected to a switch port of minimum 100 Mbit/s with
corresponding cabling.
PoE IEEE 802.3af < 3.8 W (Class 1) for an alternatively external power supply.
The DECT manager and all its base stations must be in the same layer 2 segment (common
broadcast domain).
DECT manager and base stations must be connected to the same Ethernet or virtual
LAN sharing a common broadcast domain.
51


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gigaset Pro N870E IP PRO at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gigaset Pro N870E IP PRO in the language / languages: English as an attachment in your email.

The manual is 1.33 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Gigaset Pro N870E IP PRO

Gigaset Pro N870E IP PRO User Manual - German - 151 pages

Gigaset Pro N870E IP PRO User Manual - Dutch - 150 pages

Gigaset Pro N870E IP PRO User Manual - French - 151 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info