795395
49
Zoom out
Zoom in
Previous page
1/142
Next page
Gigaset N870 IP PRO / Admin IE-UK-International en / A31008-XXXXX-XXXX-X-XX / settings_basestations.fm / 8/10/21
Template Module, Version 2.1, 11.08.2020 / Template Basiseinstellungen: Version 3.1 - 07.07.2020
Base stations
49
Reduce TX power by 8dB for external antenna operation
The transmitting power of the external antennas can be reduced. This may be needed in order
not to violate emission regulations, in case the device is equipped with external antennas.
Click on Yes/No to reduce/not reduce the transmitting power by 8 dB.
Act as Sync Master redundancy
If the DECT sync master or the LAN sync master fails, the base station can take over its role.
Click on Yes/No to define the base station to act/not to act as redundancy sync master.
If you select Yes , the Sync Level is automatically set to 2 1 to indicate that level 2 is able to
become level 1.
Activating/deactivating the base station
A base station must be active to manage the calls of the connected handsets. If it is deactivated,
it will no longer connect handsets but it still stays in the list of connected base stations.
Select Yes/No to activate/deactivate the base station.
Adding a base station to the Connected Base Stations list
Click on Confirm
Delete the base station
Click on Delete base station Confirm with Yes . . . the base station is deleted. It is shown
in the list of pending base stations again.
Reboot the base station
Click on Reboot base station Confirm with Yes . . . the base station is rebooted. All existing
connections managed by the base station are terminated.
Base station synchronisation
Synchronisation and the logical structuring of the base stations in clusters are prerequisites for
the functioning of the multicell system, inter-cell handover, and (over)load balancing. Overload
balancing means that a handset can roam to a free base, when current base is fully loaded and
cannot accept further handset connections.
Base stations can be synchronised "over the air", meaning that they are synchronised via DECT.
If the DECT connection between specific base stations seems to be not reliable enough, synchro-
nisation can also take place via LAN. To carry out the synchronisation you will need the plan of
the clusters with the synchronisation level for each base station.
The base station must been seen by all level 2 base stations with good quality to
assure that the network can still be synchronised in case of a take-over.
Please ensure that the base station you want to deactivate is not on sync level 1.
Check your sync settings before deactivating a base station. Otherwise your system
may no longer work properly.
49


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gigaset Pro N870E IP PRO at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gigaset Pro N870E IP PRO in the language / languages: English as an attachment in your email.

The manual is 1.33 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Gigaset Pro N870E IP PRO

Gigaset Pro N870E IP PRO User Manual - German - 151 pages

Gigaset Pro N870E IP PRO User Manual - Dutch - 150 pages

Gigaset Pro N870E IP PRO User Manual - French - 151 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info