50
Watch full screen analog TV on this device and be the fi rst to get the news! Depending on
the power status of the battery, you may watch TV for up to 2 hours. Please plug in the
device headset before watching TV in this device. The headset is also an antenna. You ca
adjust the headset lines for better signals.
When launching TV for the first time, this device will automatically start searching for
available channels and will set the fi rst channel detected as default channel.
Select “Settings” >
【
System
】
>
【
TV
】
, Select a country name or a PAL sub-system. If
you don’t fi nd the country name for selection you can follow the steps listed below
a) select “NTSC” for NTSC system.
b) select PAL-I, PAL-BG or PAL-DK based on your sub-system.
A good reference link to the world TV standard is http://kropla.com/tv.htm
1.Select “ Start ” >
【
Programs
】
>
【
Multimedia
】
>
【
TV
】
You can also invoke the 3D quick menu by clicking the
(key on top central keypad and
then select “ TV ”.
2.Tap the screen to open TV menu.
3.If no action is detected within 5 seconds, the TV menu will automatically disappear.
4.Tap
icon on the top right of screen to turn off TV and exit.
TV Function Bar:
1.Tap to go to the next available channel.
2.Tap
to go to previous available channel.
3.Tap
to see the list of available channels. Tap on a channel to go to that channel.
4.Tap
to adjust TV screen setup, including [ Brightness ], [ Color ], [ Contrast ], and
press “ OK ” on the top right to confi rm disabling options after completing adjustment.
5.Tap
to return to the previous channel you were watching.
6.Tap
to search for available channels.
7.Tap
to switch between loudspeaker or headset mode.