431389
34
Zoom out
Zoom in
Previous page
1/84
Next page
GN-B49G High-Speed Wireless Broadband Router
30
The SSID (Service Set Identifier) is the name of your wireless
network. The SSID is up to 32 ASCII characters in length and
case sensitive (i.e. Letters in upper case “A~Z” and lower
case “a~z” are unique). The default SSID is “GIGABYTE”. To
change the SSID, type in the SSID you want to use in the
SSID field and click Submit. If you make a change to the
SSID, any wireless devices on your network must also be
reconfigured to connect to the new network name.
Rate
Select a wireless data transmission rate from the drop- down
list. The default setting auto/best automatically detects and
sets the optimum transmission rate.
Hidden SSID
For security purposes, you may choose to hide your
network’s SSID by selecting enable from the drop-down list.
This will prevent computers scanning for the presence of
wireless networks to detect your network name. The default
setting is disable.
Authentication Type
Select an authentication type from the drop-down list. The
default setting is Open System.
Open System:
The sender and the receiver do NOT share a
secret key. Each party generates its own key-pair and asks
the receiver to accept a randomly generated key. Once
accepted, this key will only be used for a short period of time.
Afterwards, a new key will be generated and agreed upon.
Shared Key:
Authentication is based upon a secret key
shared by both the sender and the receiver. If Shared Key is
selected, you cannot choose the WEP disable option.
WPA Pre-shared key:
, The WPA Pre-shared Key
authentication standard uses a password or “ key” between 8
and 32 characters. This encryption key is changed after
every dialog box using the Temporary Key Integrity Protocol
(TKIP), which allows users to change keys based on dialog
box and automatically synchronize keys between devices on
the network. The TKIP encryption algorithm is stricter than
the one used by WEP but is based on the same standard.
WPA:
The 802.1x authentication protocol, allows users to
authenticate wireless network access through a RADIUS
Server and is a required by WPA standard. If no RADIUS
34


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gigabyte gn b49g at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gigabyte gn b49g in the language / languages: English as an attachment in your email.

The manual is 2,3 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info