GN-B49G High-Speed Wireless Broadband Router
29
• Fast Frames
• Hardware Compression and Encryption
Turbo Mode
Turbo Mode capability operates by using two radio
channels instead of just one. Providing a theoretical
108Mbps transmission. When Turbo mode is set to
enabled, Channel 6 is used and cannot be changed to
any other channels.
Super G with Static Turbo
• Not backwards compatible with non-Turbo
(legacy) devices
• Turbo mode is always on
• Only Turbo mode devices can talk to each other,
meaning all devices must be set to Turbo.
Super G with Dynamic Turbo
• Backwards compatible with non-Turbo (legacy)
devices
• Turbo mode only enabled when all nodes on the
wireless network is Super G with Turbo enabled
• Will drops down from Turbo mode to 11g mode
to allow association of legacy devices.
• Any wireless device on network not Turbo
capable causes entire network not to be Turbo
capable.
Super G without Turbo
Use Super G features but no Turbo Mode
Disabled
Super G Mode is disabled.
Auto Channel Select
The Router uses channel 6 as the default channel. Enabling
Auto Channel Select allows the Router to auto-select a
non-conflicting channel.
Channel
The channel may be manually changed (if there are other
wireless networks operating in your area) by selecting a
channel from the drop-down list.
SSID